View Single Post
  #956  
Old 01-01-23, 22:47
Chris Suslowicz Chris Suslowicz is offline
Junior Password Gnome
 
Join Date: May 2007
Location: England
Posts: 814
Default

Quote:
Originally Posted by David Dunlop View Post
I took a look in my 19-Set Parts Lists and found the following five covers:

COVERS, Waterproof No. 1 ZA 2952 for Carriers No. 21
COVERS, Waterproof No. C1 ZA/CAN 1076 in Universal Carrier
COVERS, Waterproof No. 5 ZA 10317 for Carriers No. 23
COVERS, Waterproof No. 16 ZA 10411 for Variometer
COVERS, Waterproof ZA/CAN 1362 for 19-Set Cdn in Carrier Universal

The three attached photos are of the following COVERS in my collection: No. 1, No. 5 and No. 16.

David
I can add Cover, Waterproof, No.7 which is for Carrier No.25 with the top plate fitted (this carries the Variometer, Aerial Base, and Control Unit).

This has two exit holes for an aerial rod (with Grommet No.23 and a blanking grommet so that the aerial base can be in either position), large holes with water protection flaps on both ends and at the rear, to allow for cabling to other control units - they will pass a 12-pt connector, etc. It's a complicated bit of canvas. (The stitching is going on mine, and I need to get it repaired.)

Chris.
Reply With Quote