View Single Post
  #71  
Old 22-11-17, 05:01
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

Andrew, I am sure you will have the full collection of gearbox tops. Some with no lugs, some with short lugs and some with long lugs.
My carrier has a gate, but no lockout for reverse on the gate. So, I chose to use the LP2/2a guide bracket with the sprung loaded detent that all you LP2/2a guys are familiar with. The result was that I had to change out he gearbox top because those lugs were too long for the Australian bracket (which bolts down from the top with lid fastening bolts) The two lug foul the guide plate.
The LP2 gearbox needs the top with the short lugs while the riveted carrier uses the long lugs to mount its guide plate (where the bolts go in from the side)
I hope that helps.
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote