SOCKETS, Antenna, w/Sleeve & Phenolic Cover, No. C1 ZA/CAN 4258
I finally got around to disassembling the central core of this SOCKETS, Antenna, to give it all a good cleaning. Good thing I did, as there was a lot of sooty grease packed between the Bakelite fitting and the central assembly.
Once cleaned and polished, I reassembled it for reinstallation on the Sender panel down the road, once the missing pair of #6 external tooth lock washers have been replaced. I should be able to source them locally, in spite of the current lockdown we are in.
It was interesting to notice the plating on the brass central socket was worn away, leaving the shiny brass when cleaned. The similar brass socket on the COIL, Aerial Tuning also shows a high degree of wear on the plating with and lot of brass visible. However, the ones on the three receivers are essentially factory mint in condition. They simply never got used over the service life of this 52-Set to wear them down.
David
|