#1081
|
||||||
|
||||||
Quote:
Quote:
There was (briefly) a "Watch W/T Non-Magnetic" which was actually _cheaper_ than the GSTP watches, having a chrome-plated iron case to screen the movement from the magnetic fields of generators and rotary converters in the wireless sets. They were later found to be unnecessary (and also less accurate, being cheap). Quote:
Quote:
Quote:
Quote:
The "Signals Office" used a GSTP watch but didn't adjust the time very often - they kept a record of the "error" relative to the 21:00 time broadcast from HQ and (presumably) adjusted the watch when the difference became too great. (Saves wear and tear on the watch, and they'd just add/subtract corrections in the paperwork, as required.) I have a few "B" watches, some GSTP ones, an Australian W/T watch in a brass case (that some idiot removed all the black paint from and _polished_), and a Watch W/T Non Magnetic (with Roman numerals on the dial). I've also got my father's watch (which I must get restored) that _was_ used with his WS19 (because the issue watch was unreliable), and that was a present from his uncle (who was a Major in the army and ended up in Katyn). There's an overview of military watches here:https://royalsignals.org.uk/photos/watch.htm Best regards, Chris (G8KGS) Junior Password Gnome |
#1082
|
|||
|
|||
Yikes, Chris!
First of all, thanks for taking the time to post all that information. The ‘humble’ GSTP pocket watch is a far more complex topic than I ever imagined. When I was trying to find appropriate watches to mount on my wireless sets a few years ago, I did run across a number of such watches with names on their faces, but confusion set in quickly with many comments being found on this that these were maker names and other comments they were just the names of ‘bespoke’ military tailors where officers would go to get kitted out for custom uniforms. Out of that confusion I assumed makers were unlikely in wartime to advertise themselves, so all those names were more likely just tailors who did not think the officers would be dumb enough to get captured. Beyond that, most of my research information focused on a handful of North American watch makers, as the most likely candidates to have produced the Canadian Army pocket watches. Interestingly, the steel cases came up in the NA readings I found regarding none magnetic watches with comments they were not that good. Three or four very odd alloys were discussed that had been developed in the years prior to WW2 for making the watch main springs and other movement parts that seemed to be quite effective. These alloys had very odd names that made me wonder if they had not been discovered while excavations were underway in the Mile Forts along Hadrians Wall. Sorry to hear about the polished brass watch holder. I have also seen that done to wartime military compasses, sniper scopes and binoculars ‘to restore their true value’. David |
#1083
|
|||
|
|||
I think Waltham and Elgin were the major American suppliers of watches (certainly to the British under Lend -Lease), and they were just their standard watch. My suspicion is that the Canadian WS19 Supply Unit No.2 had the watch holder moved to the front of it (instead of being on the set) was to solve the problem of tall winding stems.
The Australian watch (not a watch holder) should be finished in black "opticians enamel", I think, but mine has been "got at" by the Mad Brass Polisher[TM]. There's worse: I've seen optical instruments polished and CHROME-PLATED at some events! (Theodolites, heliographs, Instruments Flash-Spotting, and so on - they would never have been accepted for service with that finish.) On the subject of Westclox (Western Clock Co.) - they also made daylight signalling lamps as well as morse keys for the WS19. Best regards, Chris. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Canadian staff car wireless: World War 2 Canadian R103 Receiver Demo | Mike Kelly | The Wireless Forum | 5 | 24-07-16 15:20 |
Found: CMP Wireless body project | Jim Burrill | For Sale Or Wanted | 7 | 05-04-15 00:02 |
Canadian dehavilland mosquito restoration project | David Dunlop | WW2 Military History & Equipment | 9 | 10-07-14 00:51 |
Canadian project | David Ellery | The Carrier Forum | 9 | 28-04-07 01:36 |
FOR SALE/TRADE: 1944 CHOREHORSE PROJECT for Signal Corps Wireless Power Unit Project | Alain | For Sale Or Wanted | 1 | 21-02-07 00:11 |