|
|
#1
06-03-08, 03:36
|
||||
|
||||
Fuel tank
The first photo is a fuel tank with the end cut out. This one was previously coated on the inside.
 That is the baffle at the bottom.The second photo is the cut off end. We need that filler neck for the new tank. The third is the neck after a quick blast. Even after the blast it still stinks terribly.
__________________
Every twenty minute job is one broken bolt away from a three day ordeal. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode