WANTED: UC No2MkII* speedo driven gear

[Marc van Aalderen]

Hello All,

I'm after the speedo driven gear with housing. These parts are missing from my Carrier so I have no working speedometer. Anybody got these for sale?
Thank you in advance.

Best Regards,
Marc van Aalderen

[Gunner]

Hi Marc:

Try Brian Asbury.

Cheers! Mike

[Marc van Aalderen]

Originally Posted by Gunner

Hi Marc:

Try Brian Asbury.

Cheers! Mike

Hi Mike,

Thank you for a possible contact. How do I reach Brian? Is he a MLU member?
I do not know him.

Cheers,
Marc

[RichardT10829]

Marc are you refering to the brass adapter which screws into the hole on the cast peice that dirk showed you ? if so if you promise to give me it back i will lend you mine as a pattern to get one turned on a lathe...would not be a hard job for a capable person ?

[BCA]

Hi Marc,
If you mean the angle drive gear that clamps onto the speedometer then I have NOS ones in stock. Send me a PM.
This a cast fitting that the speedometer cable threads onto so you can attach the speedo cable to the speedometer. There must be properly greased and turn freely or the speedometer cable flexible shaft will break. This angle drive for Mk1 and M11 speedometers is diffrent than the T16 Carrier angle drive.
Brian

[Lynn Eades]

They are refering to the other (gearbox) end. I will post component pictures in the next 48 hrs.

[Marc van Aalderen]

Originally Posted by BCA

Hi Marc,
If you mean the angle drive gear that clamps onto the speedometer then I have NOS ones in stock. Send me a PM.
This a cast fitting that the speedometer cable threads onto so you can attach the speedo cable to the speedometer. There must be properly greased and turn freely or the speedometer cable flexible shaft will break. This angle drive for Mk1 and M11 speedometers is diffrent than the T16 Carrier angle drive.
Brian

Hi Brian,

I didn't know that that is something I'm also missing. It does make sense as the space in the Dash is very limited so no room for the speedo cable to make a big radius bend. PM sent. Thank you.

Cheers, Marc

[Dirk Leegwater (RIP)]

Originally Posted by Marc van Aalderen

Hello All,

I'm after the speedo driven gear with housing. These parts are missing from my Carrier

I have showed you this "bad" one before but still looking.

Dirk

[Marc van Aalderen]

Originally Posted by Dirk Leegwater

I have showed you this "bad" one before but still looking.

Dirk

Hello Dirk,

So you're back from your trip to Canada. The housing in your picture is not the one I'm looking for. I just need the driven gear and the housing that holds the gear in the housing you show. It is also threaded on the top to attach the speedo cable too. I have no parts book at hand but will post a picture as soon as possible. Thank you anyway for replying. Will give you a call later this week.

Cheers,
Marc