|
|
|
|
#1
14-08-07, 17:19
|
|||
|
|||
for sale: WS19 shock mounts
Hi, from the non-profit manufacturing department: I have made several sets of shock mounts for the WS19 (may fit other sets, too). These are new and work great, I have my WS19 fitted in my Dingo and it is fine. There are 8 sets (4 mounts per set) left if anyone is interested, and I hope someone is as I would like to at least get my money back. The cost is USD90 per set + postage.
PLease e-mail if interested. Cheers, Dave 
|
|
#2
14-08-07, 18:04
|
||||
|
||||
|
Do you have any pictures?
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#5
15-08-07, 04:28
|
||||
|
||||
|
Hopefully this picture shows up for Dave
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#6
16-08-07, 05:11
|
||||
|
||||
|
feet
Back in the early 1980's , Aussie disposals , a local chain store , was selling those feet for 50 cents each . I bought about 20 sets , over the years most have gone off the radio people ..... I think I have 4 sets left . Some were marked with the Canadian arrow in the C symbol .
Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#7
16-08-07, 16:25
|
|||
|
|||
|
Hi Mike,
if I had known back then... but the problem is if the old rubber hasn't been stored properly they will quickly tear apart in a moving vehicle. So, new rubber is the answer. How did I get into this? Well, I needed some, then others wanted some so I made plenty. I do not want to make any more as they cost too much to machine and are very time consuming. I just want rid of them. Cheers, Dave
|
|
#8
16-08-07, 17:47
|
||||
|
||||
|
Check your private messages and you might be able to sell some.
__________________
David Gordon - MVPA # 15292 '41 Willys MB British Airborne Jeep '42 Excelsior Welbike Mark I '43 BSA Folding Military Bicycle '44 Orme-Evans Airborne Trailer No. 1 Mk. II '44 Airborne 100-Gallon Water Bowser Trailer '44 Jowett Cars 4.2-Inch Towed Mortar '44 Daimler Scout Car Mark II '45 Studebaker M29C Weasel
|
|
#9
17-08-07, 12:19
|
||||
|
||||
|
Yes
Quote:
You are correct . The rubber does seem to be OK , but with the constant vibration of a vehicle , the old rubber may break away . I have a few 9.00-13 WW2 NOS rubber inner tubes here too , still wrapped and boxed , unopened . Not worth the risk of using them , but they do look brand new . Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
