|
|
#1
23-10-15, 03:09
|
|||
|
|||
For Sale: 216 & 235 engines
Third and final chapter in fall cleanup -two engines suitable for your CMP!
First is an original 216 it has all accesories, a good oil bath filter (not shown) correct original carb and the valves have been reseated. It probably needs a new head gasket to run -but I offer it as a suitable rebuild candidate for $250. Second is a 1959 235 out of a pickup- it is complete but has a 3 speed trany but is stuck due to rust in the bores (didn't get oiled properly) a good candidate for a rebuild for only $200 or offer 
|
|
#2
24-10-15, 00:27
|
|||
|
|||
|
hi bob
pm sent
__________________
_______________________ 1941 mk1 mortar Carrier 1941 Mk1* Carrier 1942 Mk1* Carrier 1943 T16 Carrier 1945 Mk3 Dingo 1941 Mk3 Covenanter 1941 Mk4 Churchill AVRE (now sold) 1944 Mk6 Cromwell (now sold) 1952 Mk3 Centurion 1952 ARV Centurion 1952 ARV Centurion 1953 Mk3 Centurion (breaking)
|
|
#3
25-10-15, 03:22
|
|||
|
|||
|
Post 55 235s need mod kit to fit CMPs
Be careful onthe 235.... I fited a 1954 235 with the better oil pressure system in my C-15A after having the No1 piston crash out the side of the block on my original 216.
The 1954 and 55 blocks are basically the same as the 216. The later ones moved the water pump higher. They will not fit in the bonnet, They make adapter plates because a lot of Chevy street rod trucks have the same issue as the cMPs. The later ones will work, but will need a mod kit.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| For Sale: M151 engines for sale | Bob Phillips | For Sale Or Wanted | 6 | 02-11-15 20:26 |
| Sherman GAA engines for sale | DanJahn | The Armour Forum | 1 | 05-08-10 05:47 |
| Iltis engines for sale | Wpns 421 | For Sale Or Wanted | 0 | 13-02-10 03:14 |
| 235 vs 261 engines | M38CDNBill | The Restoration Forum | 12 | 03-03-09 03:23 |
| GM 270 ci Engines | jim sewell | The Restoration Forum | 14 | 16-01-06 13:20 |
Linear Mode
