|
|
#1
11-04-10, 12:00
|
|||
|
|||
1 1/2 spanner for wheel nuts.
Many years ago I bought this spaner at Corowa. I was told it was a carrier spaner It has part #ADD 1592 and 106 under a broad arrow stamped on it. Many carrier parts have similar markings. The handle end is about 4 inches too long for the toolrack, the diamater of the handle is a tight fit in the bracket on the toolrack. I will be interested to read any comments before I cut the handle. Thanking you John.
|
|
#2
11-04-10, 12:08
|
||||
|
||||
|
do you have a piucture of it ?
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#3
11-04-10, 22:10
|
|||
|
|||
|
John
I dont know the answer, but dont cut it. It has to be for one of the carriers. Talk to colin Jones. He has most of the variations of Aust. carriers.
In the MG. 2pounder.and 3' Mortar wksp. manual, in the end of track section, there is a mod.The mod alows for a longer shaft, but not a longer handle. This mod also required a mod to the position of the bracket on the carrier tool board. Maybe you spanner is for; the 2 pounder, the mortar carrier, the LP3, or the tracked carrier,and may just be a rare item. my 2 cents worth.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#4
16-04-10, 00:11
|
|||
|
|||
|
Thank you for your comments. it will take some time to post a photo so here are some measurements, Length of handle 19 1/2 length of shaft 14 5/8 diamater 1 1/8 . It wont get cut for a while , Regards John,
__________________
John Mackie (Snr) VK2ZDM Ford GPW- script #3A Ford Trailer M3A1 White Scout Car -Under restoration- 1941 Ford Truck (Tex Morton) F15A Blitz Radio sets- #19, #122, #62, ART13, and Command
|
|
#5
02-07-10, 03:26
|
|||
|
|||
|
I've found another wheel spanner that I bought many years ago which fits the back of the carrier perfectly. It is now mounted! The first spanner is now available if anyone wants it.
__________________
John Mackie (Snr) VK2ZDM Ford GPW- script #3A Ford Trailer M3A1 White Scout Car -Under restoration- 1941 Ford Truck (Tex Morton) F15A Blitz Radio sets- #19, #122, #62, ART13, and Command
|
|
#6
02-07-10, 11:48
|
|||
|
|||
|
Better put my name on it please,John.
Regards Rick
__________________
1916 Albion A10 1942 White Scoutcar 1940 Chev Staff Car 1940 F30S Cab11 1940 Chev WA LRDG "Te Hai" 1941 F60L Cab12 1943 Ford Lynx 1942 Bren Gun Carrier VR no.2250 Humber FV1601A Saracen Mk1(?) 25pdr. 1940 Weir No.266 25pdr. Australian Short No.185 (?) KVE Member.
|
 |
|
|
Linear Mode
