Frame dimension for C-GT Body

[Don Birnie]

Good Evening Folks

First I'm not sure if I should post this question here or in a Restoration thread.
What I'm looking for are the dimensions for the lonitudinal sills and the crossmembers for the C-GT
I rememder seeing pictures of the body with dimensions but I can't seem to recall where.
I'm pretty sure that the sills and crossmembers where made of 10 gauge steel bent in a u shape.
Any and all information will be greatly appreciated.
Thanks in advance.

Slainte
Don Birnie

[Barry Churcher]

Hi Don

I have an early cab 11-12 Fat body if that is what you want. It is sitting on a sleigh that I made up to haul it out of a field in Alta.
I can get you whatever measurements you need.
Barry

[Don Birnie]

Hi Barry

Thanks for the offer I could use the help.
I'm trying to get the materials for the Fat body floor frame work.
I think the cross members are 2x3 C channel but I'm not to sure of the longitudinal sills.
Would you also check and see if the cross members go right across the sills or are they welded to them.

Thanks in advance

Slainte
Don