![]() |
#1
|
|||
|
|||
![]()
Morning, folks,
After a fascinating conversation with a collector, I've had a bit of a look at the GMC 20" six-stud wheels. I'm wondering if anyone has details of the stud circle diameter of these wheels, please? I'm wondering if a set could be used for a straight swap onto my Inter K5, to get over the 18" tyre problem. If they could be used to get the truck mobile, I could then start chasing a set of Gama Goat tyres, or save up for the DUKW repros from the States. The gentleman in question showed me Jack Neville's article about his M-H resto, which mentioned a now-deceased bloke in the US who had 8000 Gama Goat tyres. 8000! Cheers, Matt
__________________
1942 International K5 3-ton truck ARN 43362 1940 Holden-bodied Chevrolet staff-car 1941 Holden-bodied Chevrolet staff car |
#2
|
||||
|
||||
![]()
I can check mine for you but 1.5t, CcKW and M series 2-1/2t trucks all share the same bolt pattern. DUKW runs fit too but had spacers to clear brake drums with 18" wheels.
Will get back to you |
#3
|
|||
|
|||
![]()
Hi Matt
Have you check this website cckw.org some of the people are extremely knowledgable on CCKWs and relater trucks and maybe able to help. Also their forum http://cckw.org/forum/viewforum.php?...628b37d5eef32b Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#4
|
|||
|
|||
![]()
The pitch diameter of the CCKW wheel stud pattern is 8-3/4"
This is the same as Chev G506 1-1/2 ton (Yankee Joe), DUKW, White Scout Car and M series trucks with 6 stud wheels. I would be surprised if IH used the same pattern. They tended to do their own thing to a large extent though I'm fairly sure the M-2-4 used the same 16" wheels as the Dodge 3/4 ton WC so you may be lucky. David
__________________
Hell no! I'm not that old! |
#5
|
|||
|
|||
![]()
Thank you very much, folks, your assistance is appreciated.
Cheers, Matt
__________________
1942 International K5 3-ton truck ARN 43362 1940 Holden-bodied Chevrolet staff-car 1941 Holden-bodied Chevrolet staff car |
#6
|
|||
|
|||
![]()
What width 18 inch tyres do you require.
I have been looking into this problem for a Wiles cooker. A Korean tyre company can supply 7.50 x 18 tyres new in Australia with a road type pattern. If you are interested give me a PM Ron. |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
10-stud 16" rims | rob.c | The Softskin Forum | 11 | 07-03-21 04:11 |
Chevrolet C60s - Front Wheel "shimmy" | cordenj | The Softskin Forum | 92 | 05-12-19 14:05 |
what size is the head stud threads etc for 24 stud v8 merc | RichardT10829 | The Carrier Forum | 11 | 06-12-11 20:14 |
CMP wheel details | Tony Smith | The Softskin Forum | 35 | 04-06-06 08:46 |
Australian Gun Tractor details (or "Get a life") | Keith Webb | The Softskin Forum | 0 | 03-05-04 00:02 |