|
|
#1
24-02-09, 19:11
|
||||
|
||||
13" Split Rim Needed
I am in need of a 13" rim for the spare tire for my F8. I'm more than willing to pay the cost of shipping it from Canada. Please advise if you have one that's in working condition. By working condition, I mean that the lug nuts will come off without snapping!
 Thanks! Jim 
|
|
#2
24-02-09, 20:15
|
||||
|
||||
|
When I took the four wheels off my C8 apart I just used the 3/4" impact wrench and undid them all with no problems. Must be something to do with our clean prairie air! The 13" wheels aren't that common and I'm still looking for a spare too.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#3
06-05-09, 02:19
|
||||
|
||||
|
Have a spare tire now; need a 13" rim to go with it!
The last time I posted this request nothing came of it. But, being a persistent bloke, am trying again! Anybody out there in North America that has a extra 13" split rim that will fit my F8 please contact me.
Thanks! Jim
|
|
#4
06-05-09, 03:45
|
||||
|
||||
|
I was in the same situation until the other day when I stumbled across a 13" rim in a farm scrap iron pile. If I stumble across another I'll let you know.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#6
06-05-09, 12:33
|
||||
|
||||
|
Jim, they're out there somewhere, it's just a matter of time! Could one of you post a nice clear pic of the rim so our membership know exactly what to look for in terms of bolt/stud pattern etc?
__________________
SUNRAY SENDS AND ENDS :remember :support
|
|
#7
06-05-09, 16:57
|
||||
|
||||
|
Geoff, it's a rim 13"dia at the bead, by 6" wide. It has a flat dics centre with 6 lug nuts. The rim is divided in two halves secured with 12 studs and nuts, the studs being welded to the outer half and facing inward, and the 12 nuts are on the inner hub side:
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
