|  | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  CMP 3-ton canvas cover dimensions 
			
			Over on the MLU FB group Cyprien Ouvrard from France asked about a canvas cover for his C60L. Terje André Braten from Denmark shared a drawing with dimensions. I am posting it here for future reference. The canvas has three strengthening strips in the middle. BE766A50-1227-4F53-8597-6BF8256534FA.jpeg 12A45F5F-4DD4-49A4-A2AF-4BC32E02B985.jpeg 
				__________________ Regards, Hanno -------------------------- | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Meanwhile, I responded: The 3-ton canvas is just a rectangular piece of canvas. The ends fold over to close the ends. If you have the dimensions any sail maker can make one for you. 7BB61C3E-AE42-4497-8E8C-1B7BDF82690F.jpg Some have a second row with eyelets so you can fold the lower ends of the canvas when the bows are in the lowered position. 6C9CE845-85E5-4762-BA68-3B30D7DD9689.jpg 
				__________________ Regards, Hanno -------------------------- | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			Canada carrier over that hi/lo system of tarpaulin with the M135 Deuce of the 50s. It was not featured on the US trucks...just Canadian.
		 | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
|  chicago canvas 
			
			I ordered a 22 foot by 16 foot canvas from Chicago canvas by contacting them off of Ebay as they did not list that size. I had to add extra grommets down the side to match the tie downs and used a black stretch rope for the tie downs.
		 | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
|  address 
			
			Chicago Canvas & Supply 3719 W. Lawrence Avenue Chicago, IL 60625 Phone: (773) 478-5700 Fax: (773) 588-3139 Email: email@chicagocanvas.com www.chicagocanvas.com the shipping was free in the lower 48 but this one I had mailed to me and the shipping was pretty reasonable, as I recall this was 5 years ago and it was about $225 usd plus shipping. | 
| 
			 
			#6  
			
			
			
			
			
		 | |||
| 
 | |||
|  hight 
			
			I'm 6'2" and i set the hoops at a hight that i can walk down the center without scraping any hair of off by head, I like to keep what little I have up there.  The original dimensions are listed in the parts manual, there were a lot of different ones but most are rectangular like the drawing above. you might notice my roof is flat as I added a roof onto of the hoops using 1/2 plywood with 1/4 across the crown to fold over the peak. I painted it all white with a mold and mildew resistant bathroom paint, then added a layer of the bubble insulation to provide some softness then a white plastic tarp over it all to provide a brighter interior. then some extra insulation as padding on the corners and the canvas overtop. My wife says it's my alternate accomadation should i not obtain forgiveness one of these times.   | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 | 
|  Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post | 
| cmp f15 1942 canvas hoops dimensions wanted | dave piper | The Softskin Forum | 0 | 18-07-20 11:42 | 
| canvas cover | Harlé Sylvain | The Gun Park | 7 | 14-09-18 22:05 | 
| Can You ID This Canvas Cover???? | r.morrison | The Softskin Forum | 1 | 03-04-18 05:01 | 
| For Sale: 25 PDR overall canvas cover | BCA | For Sale Or Wanted | 1 | 13-02-13 02:23 | 
| For Sale: 19 set canvas cover | Peter Hommes | For Sale Or Wanted | 0 | 28-08-12 12:59 |