#1
|
|||
|
|||
Towing Attch
|
#2
|
||||
|
||||
Isn`t everyone???
All kidding aside, I am suprised that nobody has opted to have repros made from an original set of castings. I wish I hadn`t sold my original. The towing pintle is simply a cmp type which are still available as are the springs.
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1981 MANAC 3/4T CDN trailer 1943 Converto Airborne Trailer 1983 M1009 CUCV RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers |
#3
|
|||
|
|||
Sorry my son...
...the cue starts behind me and extends round the far corner, however you can have cuts...behind me. I have been barking up this particular tree here since forever.
Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#4
|
||||
|
||||
I always keep a vigilant eye open for such treasures and should I happen to find one, well, it is not for sale.
What I will promise is that I will look into repros though....
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1981 MANAC 3/4T CDN trailer 1943 Converto Airborne Trailer 1983 M1009 CUCV RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers |
#5
|
|||
|
|||
Quote:
Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#6
|
||||
|
||||
Does anyone have a pic either of a real one or from a manual?
|
#7
|
|||
|
|||
Here ya be TONY
Hitch pic as requested sir.
Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#8
|
||||
|
||||
Snowtractor:
Is that your carrier? Interesting to see the Formation Sign...50 (N) Inf Div (Tyne and Tees), part of 21st Army Group.
__________________
PRONTO SENDS |
#9
|
|||
|
|||
Not mine...
... a photo from the magnificient vehicle pages of that superb website MAPLE LEAF UP. My carrier is still in need of the Stacey towing assembly. I will paint it to match any formation of favour of the chap who finds me a hitch and name my second born after them also.
Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#10
|
||||
|
||||
So Sean...if I was to find you a hitch you`d paint bright yellow happy faces both fore and aft on the carrier???
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1981 MANAC 3/4T CDN trailer 1943 Converto Airborne Trailer 1983 M1009 CUCV RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers |
#11
|
|||
|
|||
As good as done...
...just making up the templates, is caterpillar yellow okay?
Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#12
|
|||
|
|||
As good as done...
...just making up the templates, is caterpillar yellow okay?
Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#13
|
|||
|
|||
repro towing attachments
OK gentlemen, and I use the term loosely, about 10 years ago I approached a foundry here in London to cast up steel reproductions of the towing arms. To use the original arms as patterns would mean that the end product would be solid as they could not place a collapsible core inside to produce the cavity. This would produce an arm that weighed about 90 lbs. and cost approx. $200 each back then. To fabricate a split patterns to give you a hollow arm was about ( if memory serves me ) $2000 and then about $250 per arm to cast ( more labour ). I would think that you could almost double those costs today. If you had enough people interested, say 10 people, you would be forking out about $1500 for a set of arms. If there is any interest, I could approach A.G. Anderson Foundries again and get a more firm estimate.
Perry |
#14
|
|||
|
|||
Hi Perry
I would be interested but the timing would have to len towards spring. I am all out right now moving out of the north as I promised last year. As of next monday I will be living and working in Edson, Alberta ...for all interested. By next spring I will have a house and spare bedroom so those stopping by will have a place to collapse after drinking up the house store of beer.
So, yes 100%, time table next spring. yours Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#15
|
|||
|
|||
hitch
I have this hitch on my carrier - if I needed one I would be inclined to make one out of steel plate with the pieces cut out ond welded together and if an expert were to be critical it would be inconsequential to me
|
#16
|
||||
|
||||
Hi, I have a british carrier and the studs are original made of welded steel plates, they are welded in a triangle, when the wether over here is better I will drive her out and take some pictures
Hendrik |
#17
|
|||
|
|||
Re: hitch
Quote:
Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
|
|