|
|
#1
16-11-11, 23:03
|
|||
|
|||
Axle oil seal
Hi Folks,
Any body know of a supplier of hub oil seal BB-1175 C ? or a modern part number. TTFN Shaun
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration ) 
|
|
#2
17-11-11, 00:05
|
||||
|
||||
|
Quote:
I think the ones I got recently came from Mac's Auto Parts in the US. They were labelled up with the correctly Ford part number and fitted correctly, think they were made in Taiwan ! regards, Richard
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#3
17-11-11, 05:12
|
||||
|
||||
|
I cant believe that with an OD an ID and a height you cant get something sourced from a good supplier.
There are very few I cant source if I go to the right supplier. Did all of our BV20 roadwheel seals exactly that way at a fraction of the OEM cost. R
|
|
#4
17-11-11, 06:09
|
|||
|
|||
|
Merely getting the ID and OD for that seal won't cut it as you need the grease slinger that is built onto the seal.
You won't beat MAC's price on that seal. Yes, you can buy it locally under National part number 5751 (if memory serves) , but in my experience the local jobbers wanted $70 for that seal. Last time I looked MAC's was around the $20 mark. The NSN for this seal (5330-00-286-6873) is still valid. A search shows the US military pay $30.26 each for them.
|
|
#5
17-11-11, 09:19
|
|||
|
|||
|
Shaun
Mine came from Mac's and were the cheapest I could find. It did take two attempts as I got the size wrong to start with!!!! An international phone call was MUCH easier than trying to use their web site for an international order. You're welcome to my first attempt if you like :-)) All the best Ben
|
|
#6
17-11-11, 09:41
|
||||
|
||||
|
Quote:
That might be so in a lot of cases, but on older equipment there are often sizes and types no longer available, in the case of the Ford seal the sealing lip is offset and has been said it has a slinger which matches a cone in the hub. I am on a restoration at present where a good number of transmission seals will be made to pattern for me due to peculiarites in sizes. For interest, the Ford seal was used from late 1930's right through to the 70's and maybe later.
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#7
17-11-11, 19:32
|
|||
|
|||
|
Folks,
Thanks so much for all the advise. i have located 2 and they will be arriving in the morning. yes MAC did have them for £13 ish, But Beltcher engineering also had 2 instock for £14. so seeing as they are UK based they will be here in the morning. I think the last time i bought some they were from Whally Wheatley.
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration )
|
|
#8
18-11-11, 10:48
|
|||
|
|||
|
True to form 2 new shiny seals arrived this morning ! These carriers are getting as easy to get bits for as a Jeep !!!!!
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration )
|
|
#9
18-11-11, 12:27
|
||||
|
||||
|
Quote:
steady now....
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#10
20-11-11, 04:58
|
|||
|
|||
|
Shaun
I think you mean Ford truck parts are easy to get, as opposed to carrier specific parts (which are not) You made the clutch lever didnt you?
I am still waiting for someone to tell me they have a good Canadian steering wheel for me
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
 |
|
|
Linear Mode
