C8 data plate - MLU FORUM

cletrac (RIP) C8 data plate 15-08-06, 03:33

mike mckinley hello david if it was... 15-08-06, 06:00

cletrac (RIP) It's definitely an 11 cab... 15-08-06, 07:33

David_Hayward (RIP) C8 15-08-06, 09:45

mike mckinley hi david looking foreward... 15-08-06, 16:56

Mike K Chev C8 in Australia 16-08-06, 05:11

Mike K At work 16-08-06, 05:31

cletrac (RIP) Most people won't see a lot... 17-08-06, 04:21

cletrac (RIP) Here's the front half in my... 17-08-06, 04:39

Mike K C8 ratio 21-08-06, 07:58

Alex Blair (RIP) Re: C8 ratio 21-08-06, 12:20

Tony Smith Re: Re: C8 ratio 21-08-06, 13:49

Alex Blair (RIP) Re: Re: Re: C8 ratio 21-08-06, 15:20

cletrac (RIP) Here's a picture I took... 21-08-06, 16:37

cletrac (RIP) Here's one you won't see very... 21-08-06, 16:39

cletrac (RIP) fender bracket 28-08-06, 01:47

cmperry4 That target-tug Lysander is... 24-09-06, 03:32

david moore Your C8 24-09-06, 07:10

cletrac (RIP) C8 locker 11-10-06, 06:42

cletrac (RIP) Here's one for Mike Kelly.... 11-10-06, 06:51

David_Hayward (RIP) Data 11-10-06, 09:19

cletrac (RIP) I set the locker on the C8... 11-10-06, 23:53

Mike K C8 petrol tanks 12-10-06, 07:32

cletrac (RIP) I was given a 1946 Maple Leaf... 19-10-06, 02:04

cletrac (RIP) Steering colum,n bracket 29-10-06, 05:52

cletrac (RIP) Here's something that's... 29-10-06, 06:20

Stefan Leegwater As I can remember, LwD's got... 29-10-06, 12:04

cletrac (RIP) Wireless body 10-01-07, 01:36

Mike K Many thanks ! 10-01-07, 11:49

Mike K Parts list 10-01-07, 12:22

Mike K more 10-01-07, 12:25

cletrac (RIP) Tilt mounting 11-01-07, 22:26

Alex Blair (RIP) Pipe Thread.. 11-01-07, 22:30

Mike K Good .... 12-01-07, 12:09

Mike K radio 12-01-07, 12:23

Mike K repro 12-01-07, 12:38

cletrac (RIP) Here's a top view of the tilt... 12-01-07, 23:15

cletrac (RIP) Here's a picture of the back... 12-01-07, 23:33

Mike K Great ! 13-01-07, 12:13

cletrac (RIP) Here's a picture of an 11 set... 14-01-07, 04:46

cletrac (RIP) measurements 14-01-07, 04:58

Mike K Got it .... 15-01-07, 12:40

cletrac (RIP) I figured out why the centre... 18-01-07, 19:15

cletrac (RIP) Floor bolt holes 19-01-07, 06:14

Mike K Ok 19-01-07, 10:52

Colin R This has been fantastic... 04-02-07, 00:41

cletrac (RIP) I finally got to go and see... 20-03-07, 00:56

cletrac (RIP) The step on the inside of the... 20-03-07, 01:00

Hanno Spoelstra Colin, it sure has come a... 20-03-07, 02:57

Mike K tail light 20-03-07, 10:56

Colin R Thats the one, it was pretty... 20-03-07, 17:55

cletrac (RIP) There's a 1947 farm license... 22-03-07, 03:00

cletrac (RIP) Here's another C8 data plate... 26-03-07, 00:09

David_Hayward (RIP) C8 database 26-03-07, 11:10

Colin R Many thanks David, that makes... 26-03-07, 13:14

David_Hayward (RIP) Ex-Canadian? 26-03-07, 14:29

David_Hayward (RIP) 1941 Models 26-03-07, 14:30

David_Hayward (RIP) 1942 Models 26-03-07, 14:31

cletrac (RIP) treadplate pattern 27-03-07, 02:11

Colin R Would there be a location on... 27-03-07, 11:50

David_Hayward (RIP) ? 27-03-07, 11:52

Mike K thanks 27-03-07, 13:03

Pete Ashby Re: treadplate pattern 27-03-07, 18:55

cletrac (RIP) Colin, you asked about serial... 30-03-07, 04:38

david moore Tread plate variety 30-03-07, 05:31

Mike K morse code 30-03-07, 15:00

cletrac (RIP) Here's the data plates off... 31-03-07, 23:37

david moore F8 Body plate 01-04-07, 00:58

david moore F8 data plate 01-04-07, 00:59

cletrac (RIP) David Moore, maybe David... 01-04-07, 02:36

david moore F8 date 01-04-07, 14:30

cletrac (RIP) David Hayward, could you give... 01-04-07, 16:56

David_Hayward (RIP) Not necessarily.. 01-04-07, 17:53

David_Hayward (RIP) Alberta Truck 01-04-07, 18:27

Brian Gough C8 database 02-04-07, 17:12

David_Hayward (RIP) Thanks 02-04-07, 18:21

cletrac (RIP) Here's one to ponder. Most... 04-04-07, 06:43

David_Hayward (RIP) Hmmmm 04-04-07, 06:54

david moore 8cwt running board 04-04-07, 14:03

Alex Blair (RIP) Re: Hmmmm 04-04-07, 14:29

David_Hayward (RIP) Bit of both! 04-04-07, 14:51

David_Hayward (RIP) Photo 2 04-04-07, 14:56

cletrac (RIP) Running boards 04-04-07, 17:19

David_Hayward (RIP) '41 04-04-07, 18:11

cletrac (RIP) F8s made on same day 07-04-07, 02:05

david moore How many Cab 12 F8's 07-04-07, 22:05

David_Hayward (RIP) Humble Pie 07-04-07, 22:37

cletrac (RIP) serial numbers 08-04-07, 01:54

David_Hayward (RIP) That's my point! 08-04-07, 10:41

david moore Other F8 numbers 09-04-07, 03:18

cletrac (RIP) I've put all our F8 serials... 09-04-07, 04:56

David_Hayward (RIP) Reply 09-04-07, 13:38

cletrac (RIP) I came up with some useful... 09-04-07, 22:04

david moore C8's from Peter Ford's list 10-04-07, 05:29

David_Hayward (RIP) Peter's list 10-04-07, 09:39

David_Hayward (RIP) 1940 Models 10-04-07, 09:43

david moore Ford list 10-04-07, 14:09

David_Hayward (RIP) Transcription 10-04-07, 15:26

cletrac (RIP) I went to take some pix of... 15-05-07, 04:51

David_Hayward (RIP) Door numbers 15-05-07, 08:50

cletrac (RIP) F8 frames 17-07-07, 03:06

david moore Weld in F8 frame 17-07-07, 14:01

david moore C8 door numbers 17-07-07, 14:17

Mike K Re: F8 frames 17-07-07, 16:18

David_Hayward (RIP) Chassis 17-07-07, 17:17

Hanno Spoelstra Re: Re: F8 frames 18-07-07, 11:43

David_Hayward (RIP) 101" 18-07-07, 13:53

cletrac (RIP) I don't know about the F8... 24-07-07, 08:00

David_Hayward (RIP) Frame 24-07-07, 10:15

cletrac (RIP) Data plate info 03-08-07, 02:11

David_Hayward (RIP) C15 03-08-07, 06:34

cletrac (RIP) TRA or TBA 03-08-07, 07:15

David_Hayward (RIP) Plates 03-08-07, 09:57

cletrac (RIP) I posed a bunch of data plate... 23-10-07, 17:32

Geoff Winnington-Ball (RIP) Re: Plates 23-10-07, 18:15

David_Hayward (RIP) Actually... 24-10-07, 00:15

Ken Hughes David did you know that you... 24-10-07, 08:11

David_Hayward (RIP) Wow! 24-10-07, 10:13

Colin R Need a little help!!! 03-01-08, 16:35

David_Hayward (RIP) Casting # 03-01-08, 17:07

cletrac (RIP) Colin, your engine has the... 03-01-08, 18:32

Geoff Winnington-Ball (RIP) Re: Need a little help!!! 03-01-08, 19:26

David_Hayward (RIP) Casting numbers 03-01-08, 20:51

Colin R Cheers gents appreciated,... 04-01-08, 09:35

cletrac (RIP) On my C8 the rear window... 26-01-08, 00:17

cletrac (RIP) I just bought this remote for... 28-01-08, 20:12

cletrac (RIP) Another C8 to add to the... 07-10-08, 03:31

David_Hayward (RIP) Engine prefix? 07-10-08, 09:43

cletrac (RIP) I made it back to the Cab 12... 10-10-08, 03:54

More replies below current depth...

Mike K Those things turn up here... 03-05-09, 06:17

cletrac (RIP) I found a well deteriorated... 03-06-09, 04:24

cletrac (RIP) POW carrier 15-11-09, 04:03

More replies below current depth...

Mike K mesh 15-12-10, 05:10

More replies below current depth...