Chevrolet coolant condensor can

[Tony Smith]

NOT the same as the CMP condensor can, taller dimensions but similar construction. May fit MCP or Chev car?

C8AX-2.JPG

https://www.ebay.com/itm/Original-19...MAAOSwZXFfJ1e5

Can 1.jpg Can 2.jpg Can 3.jpg

[Grant Bowker]

So at least one person besides me saw the listing and found it interesting....
It is also a smaller diameter than CMP condenser cans (but the common design elements are obvious).

[Tony Smith]

Originally Posted by Grant Bowker

....but the common design elements are obvious...

That was the reason I posted it. It appears to be NOS Genuine Chev, complete with Chevrolet logo and instructions. For those reasons alone, I thought it would be an interesting example.

And for all I know, It may also fit another military vehicle besides CMP. In fact, I originally thought it was for a Desert Jeep!

[Mike Cecil]

Looks very similar to that used on the Ford-MH 'Car, Scout, Aust' ie the Dingo. It was mounted on the right wall of the engine compartment. I had one, the difference being the legs were shorter and there was no red stencil.

So perhaps a commercially available part with many applications?

Mike

[Lynn Eades]

So, A contract that GM won to provide tanks for Jeeps, for example?

[Hanno Spoelstra]

Originally Posted by Mike Cecil

So perhaps a commercially available part with many applications?

I'd say yes.

Seller’s description:

This is an original Chevrolet accessory radiator overflow condenser tank for various 1930's-40's Chevrolet car or truck applications. This condenser is in good condition with no large dents or major rust damage. There is minimal surface wear considering it has been used. There are no unintended bends to the mounting arms and nothing appears to be modified on this part. The final picture shows the Chevrolet emblem and safety/operating instructions. The canister measures 10" long and 4-1/4" in diameter and has original fittings in-tact with no damage. This is a great add-on to set your car or truck apart from others at the car shows and cruises.

So the CMP radiator overflow tank was an off the shelf design, adapted dimensionally to make it fit the CMP trucks.