|
|
#11
31-05-13, 11:16
|
||||
|
||||
Spare Front Axle
Yesterday I took some tools (no one you'd know
 ) and bought a spare front axle, as a 'just in case' for the future. A reasonable buy at $100.Spare Front End 300513 1.jpg Spare Front End 300513 2.jpg It was virtually unmolested, but has had replacement brake hoses at some time. Unfortunately it doesn't have the lifting flanges that I wanted, so I continue the search for those. Incidentally, One of the hubs was stuck fast to the brake shoes, and had to be removed for a cleanup before I could roll it to it's resting place. When I removed the hub cap I found that this axle has the same system of locking hub nuts as Phil showed in his earlier photos. That being; Twin hub nuts with a double layer of lock ring between, and a keyed washer installed before the nuts. There is also holes through the thread for a cotter pin and castle nut, so I suppose it could use that method as well.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) Last edited by Private_collector; 31-05-13 at 11:40. 
|
|
|
Threaded Mode