|
|
#30
09-10-11, 11:17
|
||||
|
||||
Todays Progress
Work on the rear axle continues.
PA090296.jpg PA090286.jpg Diff case opened, the cleaning & assessment has began. Insides of casing were OK, but both the seals and bearing cones are not & will need replacing. I have ordered the seals from Ross Prince but feel I only asked for the fibre ring and will also need the metal part too. PA090306.jpg The pinion seal parts are knackered also. Once again, I will have to revise my parts order. As you see, I had to fight the metal bit to get it out. PA090293.jpg PA090294.jpg Didn't find any evidence of what had damaged the shorter axle end, and the differential itself seems to be OK. One of the bearings has some rust pitting on a number of the rollers and will need replacing.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode