|
|
#11
31-10-16, 12:16
|
||||
|
||||
For Frank & Marc
Frank & Marc,
Here are the compressor photos I have at hand. Will continue looking for others, but the following are the sum total right now. If you have any specific questions, post them here. If I don't know the answer, someone will! The pump should look like this one, and simply bolts onto side of the gearbox by removing a blanking plate. Tyre Pump 1.jpg Tyre Pump 2.jpg You use the same bolts which came off, and should only have to make a gasket. Oil for lubrication is shared with the gearbox. You will see in the closeup of the compressor crank, I was missing a bush between connecting rod and crank. If I remember correctly. I got one from my local bearing shop, and had to ream the inside to fit correctly. Tyre pump assembled 1.jpg p3101954-resized-1024.jpg p3101949-resized-1024.jpg Let me /us know if you need specific photo of anything in particular.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) 
|
|
|
Threaded Mode