![]() |
|
#1
|
|||
|
|||
![]()
Can someone tell me if the front winch on a GMC CCKW 6x6 is the same type as fitted to Diamond T 6x6 trucks? I need one for both and have found two for GMC's but do they fit the Diamond T?
|
#2
|
|||
|
|||
![]()
Good day Jack
The short answer is no,the Diamond T one is a bit bigger in the drum.The chassis' are different widths as well,which affects the mountings.I do know where there are some Diamond T winches or used to be a couple of years ago.If you are interested I could check but freight would be a killer getting the winch to you. Cheers Ken
__________________
1940 Cab 11 F15 1G-8129F 1941 Cab 12 C60L AIF L4710841 Middle East veteran 1941 Cab 12 F60L ARN 45818 1941 Cab 12 F60L ARN 46660 1941 Cab 12 F60L ARN 51720 A/T Portee 1942 Cab 13 F15 ARN 55236 1942 Cab 13 F60L ARN 58171 Mach "D" Loading 1942 Cab 13 C15 ARN 62400 1945 Cab 13 C60L ARN 77821 1941 Chevrolet 3 Ton GS ARN AIF L16070 Middle East veteran Canadian REL (APF) radar trailer |
#3
|
|||
|
|||
![]()
Ken,
Would appreciate it if you could see if they are still in existence. Also looking for a good bumper bar and six wheels. |
#4
|
|||
|
|||
![]()
Diamond t wreckers (969A) have a 15 000 pound winch and GMC have a 10 000 pound one.
Not sure about the Tank transporters (980) Sorry don't have a winch but I have a lot of other parts for Wreckers. What Diamond do you have? A few parts I have for sale just off the top of my head. Rear body, Fuel tank air cleaner diff centres gearbox radiator and grill Lot of other parts. Cheers Jeff
__________________
42WLA HD 41 BSA WM20 42 GPW 42 C15A 43 969A Diamond T wrecker Type 2,3 & 4 Ausssie jeep trailers |
#5
|
|||
|
|||
![]()
Hi Jack,
Sorry I missed where you said you needed a bumper. I have a bumper for sale. I would have to take a photo of it for you. I am driving down to Vic in late June. Might be able to deliver. Sorry on good wheels for sale. Cheers Jeff
__________________
42WLA HD 41 BSA WM20 42 GPW 42 C15A 43 969A Diamond T wrecker Type 2,3 & 4 Ausssie jeep trailers |
#6
|
||||
|
||||
![]()
Any bits of Tri-Master Cab ventilator to hand ?
I got an outer shell of one from Rex Cadman, but I could do with the internal hatch, lever, whatever. Basically any parts you may have spare that would be postable to Scotland. Gordon
__________________
Gordon, in Scotland |
#7
|
|||
|
|||
![]()
Hi Gordon,
I had never heard of a tri-master ventilator before so I had to check my maintenance manual. Is it the roof mounted vent on a closed cab? you learn something new every day. Mine and the spare cab I have are open cabs so sorry. Cheers Jeff
__________________
42WLA HD 41 BSA WM20 42 GPW 42 C15A 43 969A Diamond T wrecker Type 2,3 & 4 Ausssie jeep trailers |
![]() |
Thread Tools | |
Display Modes | |
|
|