![]() |
|
#1
|
|||
|
|||
![]()
Does anybody know if there were riffle clips and wooden blocks fitted next to the rear doors ?
The one which I am working on has a strip on the door frame cut of , but for what , on the floor are 2 holes , but they don`t match the front wooden butt blocks, |
#2
|
||||
|
||||
![]() Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? |
#3
|
|||
|
|||
![]()
Hi Maurice
My `45 HUP has bolt holes with captive nuts under the floor 1/4x20 by both front doors, by the left side door and on the right next to the spare tire box, and then on either side of the rear door. There are also mounting points for the clamp or clip above each of them. I'll find photos showing each of the locations, I'll have to confirm if the mounting screws for the but blocks are all the same distance apart and if that distance is the same as used on other Pat 13s and Pat 12s. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#4
|
|||
|
|||
![]()
Hi Maurice
First I check my HUP against my Pattern 13 C60S while the two mounting locations for each is 3 inches center to center. The HUP uses 1/4x20 captive nuts welded under the floor while the C60S uses 5/16x? threaded directly into the 1/4 thick floor plate. Drivers Seat 1 Right Driver Rifle Clip & But Holder CMP.jpg 2 Right Driver Rifle Clip & But Holder CMP.jpg 3 Right Driver Rifle Clip & But Holder CMP.jpg Front Passenger/Co-driver 1 Left Front Rifle Clip & But Holder CMP.jpg 2 Left Front Rifle Clip & But Holder CMP.jpg
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#5
|
|||
|
|||
![]()
Middle Seat Left Side
1 Left Mid Rifle Clip & But Holder CMP.jpg 2 Left Mid Rifle Clip & But Holder CMP.jpg 3 Left Mid Rifle Clip & But Holder CMP.jpg I assume that the earlier HUPs with mid doors on both sides that the right side mount would be the mirror of the left. Middle Seat Right Side On HUP with no right mid door having the spare tire carrier in that location instead. 1 Right Mid Rifle Clip & But Holder CMP.jpg
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#6
|
|||
|
|||
![]()
Right Rear Rifle Cup Mounting Holes
1 Right Rear Rifle Clip & But Holder CMP.jpg Left Rear Rifle Cup Mounting Holes 1 Left Rear Rifle Clip & But Holder CMP.jpg Does this provide the information you needed? I can post larger higher resolution versions of these photos if they would help or give you basic dimensions to locate the holes. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
M152 Interior Layout | Jason Ginn | Post-war Military Vehicles | 9 | 10-11-10 17:29 |
Carrier Interior | kevin powles | The Carrier Forum | 1 | 20-08-09 13:17 |
WD Interior Lamps | Richard Farrant | For Sale Or Wanted | 23 | 20-10-06 12:45 |
UC Grenade Box Interior | rob love | The Carrier Forum | 7 | 13-04-06 05:09 |
CMP Cab 12 interior | Steve Guthrie | The Softskin Forum | 10 | 03-04-05 17:53 |