Toggle switch

[Ron Pier]

Does anyone have a rear lamp-axle flood lamp change over switch for a MK2 carrier for sale. I guess it should be an on/off switch with three terminals like a dip switch. I see Dirk Leegwater has a selection of toggle switches on his Canadian trucks page with applications not stated? Also any images of the tail lamp and switch panel on a Stacy attachment carrier would be great.

Thanks Ron

[Michael R.]

If someone could please post or otherwise send an image of an original C31UCW Stacey towing attachment tie bar and tail light bracket assembly? In particular showing detail of the toggle switch mounted on the inside that selects between the tail lamp and convoy lamp. This switch may reveal a "RED" and "WHITE" name plate option? Ron and I have been discussing this, but have come up short on the correct detail of the original factory item.

[Ron Pier]

With lots of information from Michael R and some excellent photo's from Shaun Hindle and a toggle switch from Dirk Leegwater and lamp and red/white plates from Brian Asbury, my rear lamp and change over switch is now fairly accurate. Still working on the axle flood lamp and white disc. Ron

[Neil Ashley]

My Carrier has both a light on the rear of the vehicle featuring the red and white switch, and one on the Towing attachment which is not connected up and does not feature a switch.

Does this suggest that my Carrier although a Mk11* was originally built without a towing attachment.

[Ron Pier]

Neil. So you have two rear lamps? I don't know enough to comment on your carrier. I can send you the pictures that Shaun sent me for the set up on a carrier fitted with Stacey towing attachment. Ron

[Neil Ashley]

Only the one on the rear of the vehicle is wired in and the one on the towing attachment still has the waxed paper on the wiring suggesting it has never been used.