inner windshield frames

jason meade · #1 26-07-11, 03:43

I was looking at Phil Waterman site with regards to the inner windshield frames, I know his plans are for a 12 cab, would anyone have plans for a 13 cab or could someone measure one for me.
I went to our local MLVW compound where several are going for scrap metal and asked for a few inners and had six delivered to my office.
So the plan is to make a new set using them...Any ideas?
Thanks Jason

Richard Coutts-Smith · #2 26-07-11, 09:23

Jason.
As can be imagined, this topic has been covered several times, this is one thread that comes to mind :
http://www.mapleleafup.net/forums/sh...ghlight=frames
A search of this forum should bring up more.
(Got half way through making them and put it in the too hard basket.)
Rich.

jason meade · #3 26-07-11, 12:52

Thanks Richard, Should have done the search thing, Frigging with that stuff is what i enjoy.
I will spend days doing it...more to just being in the garage, if i am hanging around the house the wife finds things for me to do!
Thanks Jason

Phil Waterman · #4 26-07-11, 13:37

Hi Jason

If you don't find the dimensions you need, I happen to have the windshield frames for my HUP off the truck at the moment and will measure up what you need.

What I am not sure of is are all Pattern 13 windshield frames inter-changeable?

Cheers Phil

jason meade · #5 26-07-11, 13:56

Hey Phil,
I would take you up on your offer if you dont mind just the same.
I have nothing to go by short of one rusted channel with the hinge.
I am going to do some searching today for the sizes,but anything you can do would be great.
Jason

Phil Waterman · #6 26-07-11, 14:07

Hi Jason

I'm off to our clubs summer rally today, but I've put a reminder on my computer calendar to remind me to measure them up next week.

Cheers Phil