|
|
|
|
#1
06-03-08, 03:36
|
||||
|
||||
Fuel tank
The first photo is a fuel tank with the end cut out. This one was previously coated on the inside.
 That is the baffle at the bottom.The second photo is the cut off end. We need that filler neck for the new tank. The third is the neck after a quick blast. Even after the blast it still stinks terribly.
__________________
Every twenty minute job is one broken bolt away from a three day ordeal. 
|
|
#2
06-03-08, 04:27
|
||||
|
||||
|
This is another tank that will donate more hardware for the good tank. The sparks from the grinder ignited the nests of who knows how many generations of mice, snakes and hornets. We should have had hazmat suits.
We need the reinforcement ring under under the sending unit.
__________________
Every twenty minute job is one broken bolt away from a three day ordeal.
|
|
#3
06-03-08, 04:35
|
||||
|
||||
|
These are photos of the tank ends and the wooden bucks that Bob formed them on. Very time consuming.
__________________
Every twenty minute job is one broken bolt away from a three day ordeal.
|
|
#4
06-03-08, 14:20
|
|||
|
|||
|
Keep us posted on the process
Hi Berry
Please keep us posted on the process of making up new CMP petrol tanks. I’ve got to fabricate two tanks for my Patter 12 C60L. What are you using as sheet metal? Are you using galvanized or plain steel? Interesting how you formed the tank ends that was one of the things I was having trouble figuring out how to do. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
 |
|
|
Hybrid Mode
