MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Softskin Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 28-09-09, 01:21
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Its infectious

Made this discovery the other day. Actually Ive known about its location for a while.

Spoke to Max H this morning & promised I'd send some pictures.

Poor old girl needs some love & attention.

Any info on her would be great. My understanding thus far is it is a Chev truck with blitz running gear (that's how they came from the factory) 2wd with 3 speed gearbox (or is that I just couldnt get it into fourth?). Militarized with tow hook & 18inch rims.

Timber back (which obviously has completely gone), what do the metal bits for the tray look like (I think I might have some - not sure)

Hope everyones having as much fun as I am. If I could make a career of this sort of stuff, I would.
Attached Images
File Type: jpg Chev006.jpg (71.9 KB, 279 views)
File Type: jpg Chev001.jpg (51.1 KB, 344 views)
File Type: jpg Chev009.jpg (55.4 KB, 284 views)
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #2  
Old 28-09-09, 01:24
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default A few more pictures

More to help with specific dates and type of truck - hopefully.
Attached Images
File Type: jpg Chev002.jpg (59.7 KB, 188 views)
File Type: jpg Chev003.jpg (61.2 KB, 193 views)
File Type: jpg Chev005.jpg (47.1 KB, 199 views)
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #3  
Old 28-09-09, 01:55
cliff's Avatar
cliff cliff is offline
Moderator
 
Join Date: Mar 2003
Location: Gympie, Queensland, Australia
Posts: 3,108
Default

1941 Chevrolet. Either a 30cwt or more likely a 3 tonner. Holden assembled with Holden built cab. Which model it is depends on it's wheelbase. The front mudguards have extra sheetmetal attached. If you look at the line by the headlight that is where the original cut out guards came to.

Below is two photos of what the vehicle probaby looked like when new.

BTW the CMP used running gear from this type of Chevrolet NOT the other way round
Attached Images
File Type: jpg chevy.jpg (93.3 KB, 251 views)
File Type: jpg 3-TON STORES (AUST) NO.1. CHEVROLET..jpg (83.1 KB, 250 views)
__________________
Cheers
Cliff Hutchings
aka MrRoo S.I.R.

"and on the 8th day he made trucks so that man, made on the 7th day, had shelter when woman threw him out for the night"
MrRoo says "TRUCKS ROOLE"
Reply With Quote
  #4  
Old 28-09-09, 03:16
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Grateful

Quote:
Originally Posted by cliff View Post
1941 Chevrolet. Either a 30cwt or more likely a 3 tonner. Holden assembled with Holden built cab. Which model it is depends on it's wheelbase. The front mudguards have extra sheetmetal attached. If you look at the line by the headlight that is where the original cut out guards came to.

Below is two photos of what the vehicle probaby looked like when new.

BTW the CMP used running gear from this type of Chevrolet NOT the other way round
Great info Cliff once again. Sorry about my faux pas with the cmp/chev bits. Does this mean the truck has a four speed box & that I just could get it in the gate?

Incidently - how difficult is it to get 18 inch tyres & tubes to suit??

Is that your truck in the first picture - it looks fantastic.
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #5  
Old 28-09-09, 03:49
cliff's Avatar
cliff cliff is offline
Moderator
 
Join Date: Mar 2003
Location: Gympie, Queensland, Australia
Posts: 3,108
Default

Quote:
Originally Posted by Ganmain Tony View Post
Great info Cliff once again. Sorry about my faux pas with the cmp/chev bits. Does this mean the truck has a four speed box & that I just could get it in the gate?

Incidently - how difficult is it to get 18 inch tyres & tubes to suit??

Is that your truck in the first picture - it looks fantastic.
Tony my "Truck" is pictured below with me sitting in it I don't own a real motor vehicle and while that Chev in the photo is an Aussie Truck I think it is from somewhere down your way. Also not sure about the gearbox and this truck would be about the same size as your CMP with body/tilt etc. on it

as to 18inch tyres I think the correct size is a case of...."You want what size????? ha ha ha ha ha
Attached Images
File Type: jpg Cliff & Princess copy.jpg (95.5 KB, 172 views)
__________________
Cheers
Cliff Hutchings
aka MrRoo S.I.R.

"and on the 8th day he made trucks so that man, made on the 7th day, had shelter when woman threw him out for the night"
MrRoo says "TRUCKS ROOLE"
Reply With Quote
  #6  
Old 28-09-09, 05:22
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Hmmm a challenge then...

Thanks Cliff,

Hmmmm Yes.. I was not long off this thread when I realised the 18inch rim question has been asked before (only about 10 threads ago)

They look like a nightmare to find - nevertheless to a MLUer, it simply makes the hunt & chase all that more interesting

Max informs me it may be possible to remove 5 of the ten wheel studs in the drum (every second one)& then put 20 inch rims on. Anyone want to comment on that??

Apparently some of the front wheels on tractors (the ploughing type not the gun type) also have 18 inch rims???

Many thanks again Cliff for information.
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #7  
Old 30-09-09, 04:44
Lionelgee's Avatar
Lionelgee Lionelgee is online now
Lionel G. Evans
 
Join Date: May 2009
Location: Bundaberg - Queensland, Australia
Posts: 742
Default Tyres

Quote:
Originally Posted by Ganmain Tony View Post
Great info Cliff once again. Sorry about my faux pas with the cmp/chev bits. Does this mean the truck has a four speed box & that I just could get it in the gate?

Incidently - how difficult is it to get 18 inch tyres & tubes to suit??

Is that your truck in the first picture - it looks fantastic.
G'day Tony,

I just checked what my truck is shod with as it is the same style as the Chevy only a year older with a different grille. It had Olympic Trojans on it which are 17 X 20 it has five stud front wheels and 10 stud back dual wheels.

The dash area looks in very good nick which is a bit of a surprise.

Kind Regards
Lionel
Reply With Quote
  #8  
Old 29-09-09, 11:25
Lionelgee's Avatar
Lionelgee Lionelgee is online now
Lionel G. Evans
 
Join Date: May 2009
Location: Bundaberg - Queensland, Australia
Posts: 742
Default 2nd Phot of Chevy

Quote:
Originally Posted by cliff View Post
1941 Chevrolet. Either a 30cwt or more likely a 3 tonner. Holden assembled with Holden built cab. Which model it is depends on it's wheelbase. The front mudguards have extra sheetmetal attached. If you look at the line by the headlight that is where the original cut out guards came to.

Below is two photos of what the vehicle probaby looked like when new.

BTW the CMP used running gear from this type of Chevrolet NOT the other way round
G'day Cliff,

I have a copy of the photo of the second Chevrolet from the AWM. Since first seeing the truck I have wondered about its tonnage, as it seems to have a longer nose than other Chevys. Is this right or my eyes playing tricks? The three ton stores Chevrolet photo that is.

Kind Regards
Lionel
Reply With Quote
  #9  
Old 29-09-09, 12:24
cliff's Avatar
cliff cliff is offline
Moderator
 
Join Date: Mar 2003
Location: Gympie, Queensland, Australia
Posts: 3,108
Default

Quote:
Originally Posted by Lionelgee View Post
G'day Cliff,

I have a copy of the photo of the second Chevrolet from the AWM. Since first seeing the truck I have wondered about its tonnage, as it seems to have a longer nose than other Chevys. Is this right or my eyes playing tricks? The three ton stores Chevrolet photo that is.

Kind Regards
Lionel
It's your eyes playing tricks
__________________
Cheers
Cliff Hutchings
aka MrRoo S.I.R.

"and on the 8th day he made trucks so that man, made on the 7th day, had shelter when woman threw him out for the night"
MrRoo says "TRUCKS ROOLE"
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 13:55.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016