MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Carrier Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 03-12-10, 23:47
c dressel's Avatar
c dressel c dressel is offline
Carl Dressel CT113184
 
Join Date: Oct 2010
Location: Port Colborne, Ontario
Posts: 33
Default Gasket kits

Just wondering how I would go about getting gaskets for my motor. I have had a couple of my auto parts suppliers looking and so far no luck.
__________________
Carl Dressel
Port Colborne, Ontario.

UC2 MK1-1942,SER 10217, H#CB9208, LH 9233 CT-113184

M38A1,1/4 Ton, 1952, ORD. 630

M135-CDN, 2 1/2 Ton, 1953, ORD. 2720
Reply With Quote
  #2  
Old 03-12-10, 23:49
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default

Mac Vanpelt matey or if you know which lump you have, go onto ebay and buy a set.

http://www.vanpeltsales.com/FH_web/flathead_home.htm

http://shop.cafr.ebay.ca/?_from=R40&...All-Categories

hope this helps

Cheers
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #3  
Old 04-12-10, 09:16
c dressel's Avatar
c dressel c dressel is offline
Carl Dressel CT113184
 
Join Date: Oct 2010
Location: Port Colborne, Ontario
Posts: 33
Default

Thanks Richard
I will go this route
Have a good one
__________________
Carl Dressel
Port Colborne, Ontario.

UC2 MK1-1942,SER 10217, H#CB9208, LH 9233 CT-113184

M38A1,1/4 Ton, 1952, ORD. 630

M135-CDN, 2 1/2 Ton, 1953, ORD. 2720
Reply With Quote
  #4  
Old 04-12-10, 15:41
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default

where possible try and save as many of your gaskets as possible it makes identifying which ones you need a bit easier (if you are unsure as to what engine you have)
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #5  
Old 04-12-10, 16:11
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,259
Default Have you looked at Mac Auto...

Hi Carl

I assume you are talking engine gasket kits for Ford.....

Check out Mac Auto in Niagara Falls NY and get yourslef one of their catalogue......... best Ford supplier around....

Bob C
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote
  #6  
Old 04-12-10, 17:55
c dressel's Avatar
c dressel c dressel is offline
Carl Dressel CT113184
 
Join Date: Oct 2010
Location: Port Colborne, Ontario
Posts: 33
Default

Richard thanks great idea will do this

Bob I will check them out, good to have a supplier close at hand

thanks to you both
__________________
Carl Dressel
Port Colborne, Ontario.

UC2 MK1-1942,SER 10217, H#CB9208, LH 9233 CT-113184

M38A1,1/4 Ton, 1952, ORD. 630

M135-CDN, 2 1/2 Ton, 1953, ORD. 2720
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 06:11.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016