![]() |
|
#1
|
|||
|
|||
![]()
I am in need of a #2 antenna set. Location does not matter. Let me know what you have.
Thanks John |
#2
|
||||
|
||||
![]()
What type of radio? US, UK, Canadian... Need a little more information.
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481 |
#3
|
|||
|
|||
![]()
It is for my Canadian 19 set in my carrier. I only need the mast sections, I have the mast base already.
Thanks John |
#4
|
||||
|
||||
![]()
So you need (2) of the D rod sections, with possible spares. Some on Ebay at the moment, I also have some spares in the USA.
Lance http://www.ebay.com/itm/Wireless-Set...item2312eaa91c http://www.ebay.com/itm/Wireless-Set...item2312eaa695 http://www.ebay.com/itm/Wireless-Set...item2312eaa5ad http://www.ebay.com/itm/Wireless-Set...item2312eaa47a http://www.ebay.com/itm/Wireless-Set...item2312eaa34f
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481 |
#5
|
|||
|
|||
![]()
I should have said B set aerial set. My mistake. One short section, one longer with a machine thread on the mast base end.
John |
#6
|
||||
|
||||
![]()
I had an original B set antenna section. It's made from copper plated steel tubing ..from memory 3/16" diam. but check that . There is only one section ...its around 20" long as the freq. is around 240 Mhz.
The tubing , on the end has a 1/2" long BA screw, cheese head , the head of which is soldered into the tubing.The screw goesinto the metal top of the rubber base I had a box full of NOS rubber B set bases ... around 50 ..All gone now to various collectors . MIKE
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
![]() |
|
|