![]() |
|
#1
|
||||
|
||||
![]()
as per title folks i am looking for a pair of front armour cast hinge's as used on the fold down triangle section on mk1 carriers
I am in position to buy / swap or if possible borrow to have them copied i have some carrier bits for trade 1 x mk2 speedometer 1 x pair of mk1 rear fenders Cheers Richie
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#2
|
|||
|
|||
![]()
Have you seen Bens? I have another pair, which would need finishing.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#3
|
||||
|
||||
![]()
no matey i have not seen them... are they cast ?
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#4
|
|||
|
|||
![]()
I had them cast from an original canadian hinge in gun metal. They need the holes drilling and countersinking, and the holes drilled for the pin as well as a pin being turned up. They will also need a fly cut so that the two halves will fit together. Have a look at Bens.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
![]() |
|
|