|
|
|
|
#1
26-06-12, 11:34
|
|||
|
|||
LP2 brackets for what?
I have these 2 mounting points on the inside lower LH side of the rear hull, that I do not know what they are for.
This is an early Newport Railway hull that has been converted to a 3"mortar carrier. There are some later hull modifications (such as the ration box position on the LH side directly behind the air scoop). I am not sure if these mounting points are in late war carriers or if they are a 3"mortar modification. The pic shows the 2 mounting points chalked in white so you can see them. Any help greatly appreciated. 
|
|
#2
30-06-12, 14:23
|
||||
|
||||
|
Hey Darrin,
I went through over 300 pic's and are none the wiser. Are the bosses threaded?
__________________
Euan McDonald 4? C-GT (Aust) #8 44 C-GT (Aust) #9 42 Jeep, Trailer Aust 3 Welbike MK2 complete Welbike MK2 inconplete under resto C15A x3 C60S x1 ex ambo F60L x3 LP2a carrier SAR #4993. Trailer No27 Limber Trailer, Cario cargo Trailer, Pontoon semi Wiles Cooker 2 wheeled (jnr)
|
|
#3
01-07-12, 09:41
|
|||
|
|||
|
The 2 round mounting blocks have a 5/16 UNF thread in them.
I am trying to think what 3" mortar equipment would require a bracket/frame to be operated on/with. There is no mark in the paint (rust & shadow from exposure) to indicate what may have been there. The lower mounting block has a broken off bolt in it.
|
 |
|
|
Hybrid Mode
