Found: GMC Deuce and a half (M135) Muffler

rob love · #1 25-10-12, 02:51

Does anyone have a M135 muffler (NOS) kicking around that they want to sell? I have located most of the other exhaust parts, but the muffler is a definite need for my latest project.

Casey B · #2 25-10-12, 04:21

I'll have a look around out here at the west coast Rob!
There are a few fellas here that have duces..?
What is this one now Rob Did I see it while there?
Hope you are well...Casey

rob love · #3 25-10-12, 05:39

I towed it home last Friday, you would have seen it at that surplus yard we were at, but it was amongst the 8 or 10 that were there. It is a nice clean truck that has not been touched since about 1986. Has some issues with stuck valves, and the fuel in the tank is pretty ripe, but she is in her original semi gloss paint. Her birthday was November of 56, so it was near the end of production of her kind.

Photos will follow soon enough.

r.morrison · #4 25-10-12, 06:54

Rob: Did you give Ralph Journeay a call at Niagara Military Parts. Just bought some M parts off him last week. He's quite a bit o stock. 1 905 732-4122......Robert

Grant Bowker · #5 25-10-12, 12:22

A possible source - the one time I bought from them all was good, but there is some (other) forum comment that is less favourable.
http://www.alfaheaven.com/MilitarySe...tml#M35Exhaust
And a ebay vendor that seems to specialize in M135/211 parts
http://stores.ebay.com/Mid-Ohio-Valley-Surplus?_rdc=1

Phil Waterman · #6 25-10-12, 14:36

Hi Rob

My question is are you looking for authentic NOS or are you looking for something that looks the same and will work?

Reason for asking is that most of the guys down here that have CCKWs and Chevy military trucks have gone over to standard off the shelf mufflers for a couple of reasons the authentic mufflers (particularly for WWII) are restrictive and seem to have more problems with manifold gasket failure because of back pressure. Also the modern mufflers often come with lifetime warranties and being aluminum-ized thus they don't seem to rust out.

So now to the next question does anybody in our little group have an original M135 muffler who would measure it? Inlet, outlet size, length, diameter, and configuration of the inlet and outlets then we can try and look up a commercial equivalent.

Cheers Phil

Phil Waterman · #7 25-10-12, 15:27

Hi Rob

After responding to your question, I started to search the internet to see if I could find a substitute or commercial part number. I discovered various post on other Military Vehicle forums asking the same question. Forums like G503, Steel Soldiers are they all you or is this a really hard part to find.

Now you got me curious, think down the road and crawl under a friends M135 and M211.

Cheers Phil

rob love · #8 25-10-12, 15:32

Phil
I have seen those posts as well, and that is what has made me realize the original mufflers are getting herd to find. The design of the M135 exhaust system is such that any rainfall will accumulate in the muffler, and after almost 30 years of sitting, my muffler has succumbed to the elements.

The M135 mufflers are somewhat unique in their design, with a entry from a side flange. Before I start measuring up aftermarket mufflers I would far prefer finding an original.

Grant Bowker · #9 25-10-12, 16:48

Quote:

Originally Posted by rob love

The design of the M135 exhaust system is such that any rainfall will accumulate in the muffler, and after almost 30 years of sitting, my muffler has succumbed to the elements.

My "quick and dirty" solution was to keep a tin can over the pipe (although I had the curved top end on the pipe) to keep out rain. Every so often I had to look for a new tin when I started the truck, blew the tin off and drove over it before I rememberd to pick it up.
Many years ago, I exchanged some mufflers and exhaust parts to Brian Asbury - I have no idea if he still has them or other exhaust parts for the M-135 series.