![]() |
|
#1
|
||||
|
||||
![]()
As suggested by Lynn, this thread covers hints and traps when assembling LP2 and LP2a Australian carriers.
We have all turned a simple job into a major job at some point so if we can learn from others mistakes it can make this hobby more rewarding. On simple job I did that turned into a big job was to fit the steering cross tube into the hull upside down, it wasn't until I got the cam plate in I found the cam rollers only just contacted the cam plate.
__________________
Euan McDonald 4? C-GT (Aust) #8 44 C-GT (Aust) #9 42 Jeep, Trailer Aust 3 Welbike MK2 complete Welbike MK2 inconplete under resto C15A x3 C60S x1 ex ambo F60L x3 LP2a carrier SAR #4993. Trailer No27 Limber Trailer, Cario cargo Trailer, Pontoon semi Wiles Cooker 2 wheeled (jnr) |
#2
|
|||
|
|||
![]()
I also suggest that you take lots of photos before pulling things apart and also photos as you go. Sometimes it maybe 2 or 3 months before you return to it to rebuild. This is recommended as it helps in the long run.
![]() |
#3
|
|||
|
|||
![]()
Rick, for some of us it 2 or 3 years....or 4...........or 5....
![]() Euan, for the record then, which way is up?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... Last edited by Lynn Eades; 17-07-15 at 00:04. |
#4
|
|||
|
|||
![]()
The stamped word 'TOP' goes ... errr ... on the top??
![]() ![]() ![]() ![]() |
#5
|
|||
|
|||
![]()
Thank you Mike!
![]() Maybe I should direct my question this way? EUAN!, Do the bevels on the blocks go up or down? (as this was intended to be a helpful thread) (every body with an LP2 has probably been out to have a look by now)
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#6
|
|||
|
|||
![]()
Thank you Mike!
![]() Maybe I should direct my question this way? EUAN!, Do the bevels on the blocks go up or down? (as this was intended to be a helpful thread)
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#7
|
||||
|
||||
![]()
Lynn, The bevel goes to the top. I will try and dig out some pics.
__________________
Euan McDonald 4? C-GT (Aust) #8 44 C-GT (Aust) #9 42 Jeep, Trailer Aust 3 Welbike MK2 complete Welbike MK2 inconplete under resto C15A x3 C60S x1 ex ambo F60L x3 LP2a carrier SAR #4993. Trailer No27 Limber Trailer, Cario cargo Trailer, Pontoon semi Wiles Cooker 2 wheeled (jnr) |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carrier Assembly; Helpful hints, tricks and traps | Lynn Eades | The Carrier Forum | 19 | 25-11-24 05:27 |
My first carrier: some assembly required | super dave | The Carrier Forum | 207 | 24-03-17 22:52 |
Wanted: Carrier Radiator Cap Bellows Assembly | Lynn Eades | For Sale Or Wanted | 8 | 12-11-13 13:40 |
Carrier tow chain and wire assembly | andrew honychurch | The Carrier Forum | 4 | 17-06-12 08:51 |
Wanted: LP2/2A Carrier Brake Spindle Assembly | Ian Patrick | The Carrier Forum | 0 | 13-05-11 00:02 |