The elusive F15A FRONT Grease seal

[sth65pac]

Hi all,
Well I am good, but not that good...................... and I cant for the life of me work out what seal I need for the grease seal for my F15A's front axle.

In the book it says part number 1190B SEAL FRONT AXLE HUB GREASE OIL LEATHER but surely there must be a neoprene replacement. Mine is non existent so Lots of help is required. REMEMBER its an F15A and the parts change with different models and makes.
I have the 'free' greased brake shoes so I am thinking that replacing this grease seal should solve the issue.

HEEEEEELLLLLP

Cheers,

Ian

[Phil Waterman]

Hi Ian

Having had to replace the hub seals on my HUP years before the internet and hence before MLU. I'm pretty sure that once you clean up the hub you may actually find that it has numbers on it which a good industrial bearing house will be able to provide a cross over to a new modern seal. Also measure the ID x OD x Depth of the existing seal.

With the measurements we should be able to confirm a modern number. It will be interesting to see if is actually different from the seals on a C15A .

Don't be surprised if the new seal is half the thickness of the original.

Cheers Phil

[Hanno Spoelstra]

Ian,

Check this thread, it contains a cross reference for 1190B:

http://www.mapleleafup.net/forums/sh...ighlight=1190B

HTH,
Hanno

[sth65pac]

Yes,
I read it through twice but numbering the seals isnt helpful to location.
I know that you are referring to seals but these are leather, not neoprene.

Also its too confusing as you and others have not identified which seal is where?

Hence this new thread.

Cheers,

Ian

Originally Posted by Hanno Spoelstra

Ian,

Check this thread, it contains a cross reference for 1190B:

http://www.mapleleafup.net/forums/sh...ighlight=1190B

HTH,
Hanno

[Mike Kelly]

Try AA Bearing & Oil Seal
Service in Melbourne, they specialize in vintage oil seals for older vintage cars but you need to measure the diameters ie the outside diameter and width. Chicago Rawhide have a huge range of modern seals , just look at their web site.

[sth65pac]

Thanks Mike,

Its just a wee 780km drive to Melbourne for me.

Cheers,

Ian

Originally Posted by Mike Kelly

Try AA Bearing & Oil Seal
Service in Melbourne, they specialize in vintage oil seals for older vintage cars but you need to measure the diameters ie the outside diameter and width. Chicago Rawhide have a huge range of modern seals , just look at their web site.

[Hanno Spoelstra]

Originally Posted by sth65pac

Yes,
I read it through twice but numbering the seals isnt helpful to location.
I know that you are referring to seals but these are leather, not neoprene.

Also its too confusing as you and others have not identified which seal is where?

Hello Ian,

See this message in the thread: http://www.mapleleafup.net/forums/sh...430#post254430:
Part number: *C01Q-1190-B
Part name: Seal - front axle hub grease leather oil seal
cross references to SKF 45150: http://www.skfextranet.com/catalogs/...il.asp?s=45150 which is a modern Nitrile seal.

To make sure, remove the old seal and check the following measurements:
OD: 6.25"/ 159,8 mm
ID: 4.5"/ 120 mm
If your old seal measures up to this, contact your nearest auto parts center and order SKF 45150. If they don't stock SKF they will be able to cross reference it to another brand.

HTH,
Hanno


PS: SKF took over Chicago Rawhide many years ago, but are now rebranding them again as CR Seals - meanwhile the part numbers stayed the same, so CR 45150 = SKF 45150.

[sth65pac]

Ahh Yes, what I suspected but wasn't sure. Thankyou.

My Auto shop charges in gold bars so its a short 50 minute drive to Wollongong. Thankfully it is one of the largest coal mining cities in Australia and there are several good bearing and seal suppliers.

Lugging a 200KG Differential up in my pickup isnt impossible, but it is inconvenient.

I am not the person to measure things with a vernier, and i have never trusted myself (even been trained formally in using a vernier & micrometer)

I don't like the idea of buy twice 'cause you got it wrong the first time.
I have a collection of VW parts like that.

Cheers,

Ian

Originally Posted by Hanno Spoelstra

Hello Ian,

See this message in the thread: http://www.mapleleafup.net/forums/sh...430#post254430:
Part number: *C01Q-1190-B
Part name: Seal - front axle hub grease leather oil seal
cross references to SKF 45150: http://www.skfextranet.com/catalogs/...il.asp?s=45150 which is a modern Nitrile seal.

To make sure, remove the old seal and check the following measurements:
OD: 6.25"/ 159,8 mm
ID: 4.5"/ 120 mm
If your old seal measures up to this, contact your nearest auto parts center and order SKF 45150. If they don't stock SKF they will be able to cross reference it to another brand.

HTH,
Hanno


PS: SKF took over Chicago Rawhide many years ago, but are now rebranding them again as CR Seals - meanwhile the part numbers stayed the same, so CR 45150 = SKF 45150.