Wanted: 13" ford 5.5 pattern rims

[Scott Cacciamani]

wanted 13" 5.5 Ford pattern rims. Though i don't think i can find the correct tires for them.
thanks

[super dave]

There is a guy Don Gordan on the island that has an 800 weight truck that converted them to 15". He took an old trailer wheel and cut out the center of it and then bolted the 13" combat rim to it and gave a couple tack welds on the back side and has been working good ever since that I can remember. Something to consider as nearly impossible to find any decent 13" tires.

[Scott Cacciamani]

i had been considering that believe it or not.
still would have to find tires.
thanks

[Scott Cacciamani]

are ther any 13" combat rims of any bolt pattern around?

[Paul Singleton]

There was a private wrecker yard near me that did have some 8 cwt six bolt wheels. The grandson lives there now, I will see if there is anything there this week. Shipping would probably be expensive though.

Paul

[Scott Cacciamani]

thanks. i would like to have them on hand at least.

[Alex van de Wetering]

Originally Posted by super dave

There is a guy Don Gordan on the island that has an 800 weight truck that converted them to 15". He took an old trailer wheel and cut out the center of it and then bolted the 13" combat rim to it and gave a couple tack welds on the back side and has been working good ever since that I can remember. Something to consider as nearly impossible to find any decent 13" tires.

That's quite neatly done, as the overall "look" is pretty much the same!

There is a number of options for period looking 9.00-13 tyres though; Trelleborg, Alliance and BKT for instance.....but in all honesty, they are all Implement tyres, so if you are after a DOT tyre, than you would have to look at other options.

http://www.mapleleafup.net/forums/sh...803#post228803

[Scott Cacciamani]

Originally Posted by Alex van de Wetering

That's quite neatly done, as the overall "look" is pretty much the same!

There is a number of options for period looking 9.00-13 tyres though; Trelleborg, Alliance and BKT for instance.....but in all honesty, they are all Implement tyres, so if you are after a DOT tyre, than you would have to look at other options.

http://www.mapleleafup.net/forums/sh...803#post228803

the truck will only be run on grass. i will have a set of 16" jeep tires ready for the road, but the truck itself is more of a dune buggie than truck.

[Scott Cacciamani]

Thinking, the studs on a 1940 ford pickup are mounted on the brake drum. For 20.00 in studs i coulgs make any wheel bolt pattern i like by drilling and pressing new studs in. Give em a tack for good measure. thanks again.