Inspired by Phil's inventions....

[Bob Carriere]

Insoired by Phil's wonderful web site and all the pictures of gadgets and thingamagigs that he has invented I built a support for the transfer case which tend to be a bit heavy to manouevre on a work bench.

I use an old spare engine stand ( never have enough of them) and used the swivel head from another discarded engine stand and built a device that allows me to rotate the sucker on two seperate 360 plane.......

Used it first time today...... darn I should have taken a picture of Rob scrapping the dried up grease/oil/sand crud from the case.

The t-case has had two heavy soaking with engine degreaser and will now be submitted to a pressure washer.... actually the original OD paint is now visible.

I left the original bracket so I can orient the case the same as in the frame for checking fluids.

Had a wonderful day sandblasting..... now have sand in everything including my undies.... wonder if I could have pearls if I left the sand where the sun don't shine..?????

Bob C

[Alex Blair (RIP)]

Originally posted by Bob Carriere
I use an old spare engine stand ( never have enough of them) and used the swivel head from another discarded engine stand and built a device that allows me to rotate the sucker on two seperate 360 plane.......

Bob..
That is a honey of a stand...Why I'll bet with a set of duals and a four barrel that thing should get another 50 miles an hour out of it...It looks like it's going a 100 MPH in the piccture...
Neat-OOOOO!!!!