F 30 brake cylinders

[Andy Mitchell]

Hi all,

I am having brain fade here, are the front brake slave cylinders on an F30 LAAT 1 3/8 inch ?

[Jacques Reed]

Hi Andy,

That is correct.

Front cylinders 1-3/8" bore and rear cylinders 1-1/2" bore.

Cheers

[Andy Mitchell]

Thanks for confirming what I thought.

Does anyone in UK know where I can get a new cylinder ?

Cheers,

Andy

[Marc van Aalderen]

Andy,

Did you try Leegwater? Can bring them over for you as usual. Will be going to Tankfest end of June.

Cheers,

[Hanno Spoelstra]

Andy,

Would this be of help?

Regards,
Hanno

[Andy Mitchell]

Hi Marc and Hanno,
Stefan tells me he has a cylinder and is coming back to me later this week, so I will let you know.
Problem is I am in Belgium for work but should be able to get on e-mail.
Cheers,

Andy

[gjamo]

https://www.ebay.com.au/itm/Drum-Bra...MAAOSw1xpa1gL5

[Mark Towers]

Hi all,

May I quickly jump onto this thread and politely ask what are the correct size break cylinders for the F60 ? (Front and rear)

A rear cylinder on my F60 LAAT is sticking on and I need to investigate? Perhaps time to change all cylinders front and rear ? Can they be purchased here in the U.K. ? does anyone know any good suppliers over seas ?

Kind regards,

Mark

[Hanno Spoelstra]

Originally Posted by Mark Towers

May I quickly jump onto this thread and politely ask what are the correct size break cylinders for the F60 ? (Front and rear)

A rear cylinder on my F60 LAAT is sticking on and I need to investigate? Perhaps time to change all cylinders front and rear ? Can they be purchased here in the U.K. ? does anyone know any good suppliers over seas ?

Hello Mark,

See Jacques' remark above: Front cylinders 1-3/8" bore and rear cylinders 1-1/2" bore.

Also search the thread "Modern Part Numbers for CMPs" for various supplier part numbers - here is one of the options: http://www.mapleleafup.net/forums/sh...040#post123040

Dismantle the brakes and check the cylinders, if they are in good order you will only need new cups. Is the cylinder walls are pitted have them resleeved or buy new, complete cylinders off the shelf.

HTH,
Hanno

[rob love]

Originally Posted by Mark Towers

Hi all,

May I quickly jump onto this thread and politely ask what are the correct size break cylinders for the F60 ? (Front and rear)

A rear cylinder on my F60 LAAT is sticking on and I need to investigate? Perhaps time to change all cylinders front and rear ? Can they be purchased here in the U.K. ? does anyone know any good suppliers over seas ?

Kind regards,

Mark

Rears are WC4511. A search on ebay shows plenty of them starting at around $45. If shipping gets obscene, you can also check rockauto.com for the same part number and see if that works out better.

[Andy Mitchell]

Hi Hanno, is that a new cylinder ?

[Hanno Spoelstra]

Originally Posted by Andy Mitchell

Hi Hanno, is that a new cylinder ?

Hello Andy,

The one I posted a photo of is used, but cleaned and repainted.

If it is of any use to you, I would gladly send it over to you for the cost of postage plus a small donation to MLU (to be determined by yourself).

Regards,
Hanno