engine and gear box mounts - Page 3

Pedr · #61 25-06-06, 17:53

Here's another picture of this piece showing fitment.

Pedr

ron · #62 26-06-06, 08:06

G Day,
Pedr, many thanks for the latest posting showing the conduit layout, My carrier does not have the hole in the rear wall behind the seat back, I have installed the coduits less the one conected to the starter motor, One of the carriers that I had years ago had a Flexable metal conduit for this conection so I have decided to install this method,I have just got back home from dropping off the wheels to get re rubbered, it is going to take a few weeks to get done but that will give me time to do other things, thanks again for your help.

.
Ron

Bob Moseley (RIP) · #63 29-06-06, 01:39

Hi Ron
Carrier looking good, you'll have to name it "Ron's Rocket" due to the speed of restoration. I tracked down our terminal block and photographed it. Hope these help.
Bob

Bob Moseley (RIP) · #64 29-06-06, 01:41

Bob Moseley (RIP) · #65 29-06-06, 01:43

Last. Email me if you need anything else.
Bob

ron · #66 29-06-06, 02:13

Hi Guys,
Had a good day yesterday got a couple of leads on parts and picked up theses goodies, Flying south next week to get some more bits and pieces,
Ron.

ron · #67 29-06-06, 02:21

Hi Guys here is a pic of the other goodies that I got

Ron

ron · #68 29-06-06, 02:28

This shows the Red & Blue lenses

Ron,

ron · #69 29-06-06, 11:16

Hi Guys,
Hear is annother request could someone out there please measure up their rear mud guards and give me the sizes so that I can bend them up I realise that they are quite simple but do not have any sizes, I am picking up a set of front mudguards in the morning, thanks guys for your help,

Ron,

ron · #70 29-06-06, 13:53

Hi Guys,
Forgot to ask earlier if any one out there has a spare flat gunners plate for the front of my machine for sale? if not could someone please supply me with the measurements and the thickness of the steel please so that I can make one up, also could you tell me the diameter of the hole in the plate for the bolt
Thank you,
Ron,,

ron · #71 30-06-06, 04:35

Hi Bob,
Many thanks for the pics of the terminal box they will be very helpful,
Regards,
Ron

ron · #72 30-06-06, 04:42

Hi Guys,
Well one more hurdle over, I finealy got a set of front mudguards, still looking for a few small things but now have most of what I need to complete the carrier,

Ron,