|
|
#10
31-03-12, 03:01
|
|||
|
|||
Here is the Fenton with Y pipe
If anybody is curious here is the Fenton two piece manifold with the Y pipe I fabricated. This was originally made for the 216 engine but is shown here on the 261 during finial testing before the 261 went into the Pattern 13 C60S.
Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode