Also I got a couple of the flex hoses made up from an example and installed from the oil cooler bypass valve to the lines on the frame, Its nice that they had the fittings for it as it was British thread. As for the lengths the parts book says 27" overall length for the long one and 23" for the shorter one. In installing them I would recommend going to 24" overall length for the shorter one as the crimp on ends are a little longer than the originals and give a little less to the flex points so a little longer on the shorter one will have a better curve out of the fittings, Just my 2 cents.
Next in line will be the conduit and wiring, Will be nice to get that over with
16-01-16, 03:28
Threaded Mode