|
|
#9
16-04-18, 17:50
|
|||
|
|||
I did a quick check, and the existing flex line from the frame is the correct flare size to go into the small Ford fuel filter. I may try this setup on my own M38A1 at home. A 1/4 elbow, the Ford filter, and then the flex line onto the filter. The only difficulty that I can foresee is the close proximity of the lower rad hose to the filter. I would prefer a little more clearance between the hose and the filter so as to minimize heat transfer.
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Does anyone recognise this type of fuel filter? | ajmac | The Carrier Forum | 5 | 16-04-18 19:56 |
| Fuel filter for Sexton needed. | Jesse Browning | The Armour Forum | 1 | 19-03-10 13:24 |
| Fuel Filter Kits fir Iltis @ Princess Auto | Stuart Fedak | Post-war Military Vehicles | 1 | 21-02-07 04:49 |
| M37 fuel filter | JD Baillie | Post-war Military Vehicles | 12 | 13-05-04 15:56 |
| Wanted Replacement Strainer Assy. (Fuel Filter) | Ted Gil | The Restoration Forum | 3 | 06-09-03 00:28 |
Threaded Mode