|  | 
| 
			 
			#7  
			
			
			
			
			
		 | |||
| 
 | |||
|  No dice..... 
			
			Engine and Bellhousing is NOT a CMP.... neither is the tranny with the incorporated Emergency brake........ I doubt that you would use it again on a CMP.......  Now that modern transmission could be used on a C15 2 wheel drive without a transfer case.  BUT NOT on the typical 4x4 as the modern tranny is too long and the resulting driveshaft between the tranny and t-case ridiculously short and would need a machine shop to fabricate...$$$$ Save that brake master cylinder.... it can most likely be resleeved/rebuilt. You did save the axles didn't you.....? The two heavy cast steel brackets at the extreme end of the rear frame should be saved. Boob 
				__________________ Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada | 
| 
 | 
 |