|
|
#19
27-07-10, 04:24
|
|||
|
|||
216 vs 261....
Here are a bunch of pics from my files......
You will noticed that you need BOTH the flange and the pulley to reinstall the larger 261 water pump pulley...... Scream if you have questions..... You will need to press the existing pulley and flange off the pump.... press on the small bolt pattern 261 flange than bolt on the pulley...... I probably have the parts you need....but would suggest you check on the continent first as shipping can be costly.... you alternator pulley should probably be changed as well for a larger one so it will no spin so fast at high speed......... make sure the pulley width is all the same.... it can vary between 7/8 of an inch for an early 216 to 5/8 to 3/8 on later models. I beleive that the shaft size are the same between 216 and 261. Keep plugging at it...... Boob Boob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada 
|
|
|
Threaded Mode