Can I check how folks are routing the cable down to the solenoid?
I've followed the routing of the old cable, across the clips by the twisty grease doodah, around the edge of the edge bay to the handbrake area and then down close to the doghouse spring clip immediately above the solenoid.
With a bit of wobbling the cable has moved close to the exhaust manifold (actually to the point of touching an old earth cable that was about to get very hot....) hence this is clearly not the best routing.
There's a smaller diameter cable loom running through some metal clips in the area that look battery cable sized - are these supposed to be for the battery cable?
|
16-06-12, 17:04
Threaded Mode