Restoration of Hull 731- Carrier, MG (Aust) Mortar Carrying

[John Mackie]

i find that en eze out will not remove all but the easiest of broken bolts . when doing my carrier i had to remove about 20 broken bolts. the method i used was to build the broken bit of bolt up with stick weld.when there is about 1/4 inch protruding let it cool and it will unscrew with a pair of multigrips.
last week when dismantling a jeep gearbox one of the selector rail screwswould not undo with the allan key. five minutes with the welder and the screw came out.