11 Set stuff

[Ron Pier]

Another session today and I've made the doors from old off cuts of sheet metal I've had stacked up for years. I decided not to try and make ultimate replication of the doors! In part because of the guesswork involved, but also because of my limited metalwork skills! My top clip works fine with the addition of a piece of 4mm bar welded to the top of the door for it to clip over.......(I need to find another one for the bottom). I also replaced my panel fixing screws with some much larger ones. I ran out of 3/16" dome head rivets, and will need to buy some more to finish the hinges. Ron