rainy day projects, extinguisher

[Harry Moon]

A little project i undertook for all the brass fire extinguishers that decorate my MV's.
I cut off the handle after pulling it out to pump, and then melted the solder to pull off the cap. then cut off all the internals, clean it up and solder the handle to the cap, solder back on the tip and remove all the solder from around the cap rim. for painting the inside to make it easy to see whats inside, i learned to use a long brush to paint the bottom and it says a lot of the rattle tin paint.
makes a handy storage for insurance and registration and a pair of sunglasses, phone charger etc.