Pretty sure the number is meaningless. It would have likely had a domestic number on it. I will carefully strip the door with the CAA and see what I can find.
At this point, aside from the hitch difference, I would say the frame rails are identical. All the holes are there for the winch, the various crossmembers, and even the winch guide. There is one hole on the rear crossmember that has to be enlarged for a cable guide, but the frame itself seems identical aside from the hitch area.
The toughest part is going to be to salvage some of the frame gussets near the winch. A lot of them have been welded over to the point that I don't even see the rivets anymore.
Notable is that the crossmember from the 15cwt that was behind the transfer case had to be moved up about a foot, and there needs to be a pair of spacers underneath as the frame gets wider. I was able to salvage those from the tractor frame. All the frame holes were there.
Last edited by rob love; 03-08-22 at 22:12.
|
03-08-22, 18:08
Similar Threads
Threaded Mode