![]() |
#14
|
|||
|
|||
![]()
Hi Mike
Thanks for the reply. Yes, I have checked the spark plugs and they are blackened (but not fouled) as you’d expect with a rich mixture. I’ve gone back to 91 octane as I received advice saying these low compression engines don’t benefit from the higher octane anyway. I connected a vacuum gauge to the engine yesterday and played around with the timing. The gauge showed a reading of about 17 1/2 (in the green) when I first fired the engine up today. I played around with the idle mixture screw but got no change in the vacuum. I then manually adjusted the distributor and got the vacuum reading up to 21. See the video here: https://youtu.be/dlkhzon6CX0?si=wQJrhsXb42FoXoJ_ I think it is quite advanced at that point and I can't see the white mark I put on the flywheel at all with the timing light at that setting. That gives it the fastest idle but it hasn't changed the popping in the exhaust or the stumble as I blip the throttle. I still suspect something isn't right in the idle circuit of the carburettor so I'll have another look at that. Thanks for the assistance.
__________________
Cheers, Darryl Lennane 1943 Willys MB 1941 Willys MBT Trailer 1941 Australian LP2A Machine Gun Carrier 1943 White M3A1AOP Scout Car 1944 Ford M8 Armoured Car 1945 Ford M20 Armoured Car |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Generator with jxld engine. | ruumar | The Restoration Forum | 19 | 08-04-10 16:44 |
C30 versus C60S cabs | David_Hayward (RIP) | The Softskin Forum | 2 | 23-11-08 00:15 |
DND versus CMP ? | Mike K | The Softskin Forum | 2 | 03-06-08 14:51 |
Wedge Hat versus Beret | Garry Shipton (RIP) | WW2 Military History & Equipment | 3 | 09-03-05 19:32 |
9.00-16 U.S. versus British wheels | Mike K | The Restoration Forum | 12 | 03-03-04 22:04 |