ws19 wiring plate in Mk1 UC

[Jordan Baker]

Hi guys.

I have a question about the wireless installation in the Mk1 UC. On pg R22 of the Carrier Maint manual, step 68.

Mount the wiring diagram plate (not shown) on the forward engine cover plate, using 4 1/4" -20x1/2" long round head machine screws, nuts and lock washers. This engine cover must be drilled in the field to take the plate, and the necesary holes should be made so that they clear the asbestos metal retaining strip located on inside of cover.

Since the diagrams don't show the wiring plate can you please check your egnine covers for these holes drilled on them. They would be about 6" apart from each other as the plate is +-8" square.

Anyhelp in determining the location of this plate would be most helpfull.