|
|
|
|
#1
14-02-09, 07:51
|
||||
|
||||
Robert Pearce C15A Yaven Creek NSW going out to fit back of cab after spending most of the day doing voluntry work at the catholic school, I can't remember voluntering but Vicki said I did!
__________________
Robert Pearce. 
|
|
#2
14-02-09, 09:05
|
||||
|
||||
|
Myself, Eltham Ford F15. Fitting horn, windscreens and cleaning/painting lots of other parts.
Euan McDonald - Glenburn Ford F60L - fitting front axle to prepare it for sandblasting John Stokes - Seville - Chevrolet 60CWT cut down chassis New South Wales Howard Holgate - Ganmain - Ford F15 cab 12 Tony Elliott - Ganmain - Ford F60L cab 12 Max Hedges - Yass - Chevrolet C30 cab 11 Robert Pearce C15A Yaven Creek NSW going out to fit back of cab after spending most of the day doing voluntry work at the catholic school Andrew wykes -Dubbo-cab 12 c8 and cab 12 c60l -drilling rear crossmember for c60l and jigging c8 and c60l ready for re-rivetting on chassis South Australia Bob Moseley/Colin Jones - C60S based halftrack
__________________
Have a good one  Andrew Custodian of the "Rare and Rusty" 
|
|
#3
14-02-09, 10:47
|
|||
|
|||
|
Too busy making sure the gear is ready to go for Oberon next week, if it not done now, it won,t get done.
__________________
macca C15 C15A
|
|
#4
14-02-09, 12:04
|
|||
|
|||
|
addition from the other side of the paddock
A quick poll on Saturday Feb 14th 2009 to see how many CMP projects are being worked on today.
With Corowa just over a month away I was working away on the F15 and it occurred to me there must be several other people and projects being worked on at this very time. Below is an incomplete list based on those I could think of quickly who would be doing the same. Please feel free to amend or add to the list, you don't need to be preparing for Corowa. How many of you are working this Saturday (wherever you are in the world)? Please add your name, location, vehicle type and the work you're doing today. First Victoria: Myself, Eltham Ford F15. Fitting horn, windscreens and cleaning/painting lots of other parts. Euan McDonald - Glenburn Ford F60L - fitting front axle to prepare it for sandblasting John Stokes - Seville - Chevrolet 60CWT cut down chassis New South Wales Howard Holgate - Ganmain - Ford F15 cab 12 Tony Elliott - Ganmain - Ford F60L cab 12 Max Hedges - Yass - Chevrolet C30 cab 11 South Australia Bob Moseley/Colin Jones - C60S based halftrack Western Australia Wayne Henderson - New steel floor in Ford FAT no. 9
|
|
#5
14-02-09, 13:43
|
|||
|
|||
|
From the Top End
A quick poll on Saturday Feb 14th 2009 to see how many CMP projects are being worked on today.
With Corowa just over a month away I was working away on the F15 and it occurred to me there must be several other people and projects being worked on at this very time. Below is an incomplete list based on those I could think of quickly who would be doing the same. Please feel free to amend or add to the list, you don't need to be preparing for Corowa. How many of you are working this Saturday (wherever you are in the world)? Please add your name, location, vehicle type and the work you're doing today. First Victoria: Myself, Eltham Ford F15. Fitting horn, windscreens and cleaning/painting lots of other parts. Euan McDonald - Glenburn Ford F60L - fitting front axle to prepare it for sandblasting John Stokes - Seville - Chevrolet 60CWT cut down chassis New South Wales Howard Holgate - Ganmain - Ford F15 cab 12 Tony Elliott - Ganmain - Ford F60L cab 12 Max Hedges - Yass - Chevrolet C30 cab 11 South Australia Bob Moseley/Colin Jones - C60S based halftrack Western Australia Wayne Henderson - New steel floor in Ford FAT no. 9 Northern Territory Jared Archibald - cleaned off leaf debris, adjusted cover on cab of C60X (monsoonal rain for last 3 weeks - I wish we could send it south to those that need it so much more than us - we have plenty.....)
|
|
#6
14-02-09, 20:30
|
|||
|
|||
|
Does worked on it all week count?
Interesting activity spot check, Feb 9-14 reassembly of the engine for my C60S which broke a valve guide. Got the head back from the machine shop with new guides reassembled the engine and started it on the test stand.
Oh yes I'm a little ways away from Corowa or about as far as you can get. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#7
14-02-09, 20:44
|
|||
|
|||
|
From over the ditch,
Work under way for the Kiwi version of Corowa in Easter this year in my home town of Gisborne NZ:
Chev C8AX GS: just needs a new Warrant of Fitness, and muffler repair Chev C8Ax Ambulance: need to complete repairs due to broken rear half shaft, then fit a new gasket on the exhaust manifold, and clean out the rear brakes, followed by Warrant of Fitness and Road Licence. Chev C8AX Radio Shack: fitting furniture inside rear body, kitting out with NZ made ZC1 radio installation. Won't be on the road in time, but still wishing to show it off. Other jobs are Getting a Certificate of Fitness for the RL Bedford, and we have already got the LP2 MG Carrier ready with work on rekitting the fuel pumps, sorting a stuck valve and general maintenance like track tensioning. All the best with Corowa. I hope to get over there before too long. Rob
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
